Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

NEW - Finless ROM 2.0 - KitKat 4.4.2 for AP6210 wifi - BETA

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by d33 View Post
    Originally Posted by Phycopat
    Do you have any idea why there is a difference?
    1400 vs your 1700?

    There is a variant of the CPU, RK3188m which is limited to 1,4. Other than that, no!


    Sent from my iPhone using Tapatalk
    I flashed my CX-919 with the 1800/798/800 kernel. The performance improvement over 1.6b on XBMC is amazing, but Antutu states that CPU speed is 1416Mhz, RAM speed is 453 and GPU scores are 855/1226 for 2D and 3D respectively. Overall score was 14110.

    Is there a way to know if my CX-919 has the speed-capped SoC without opening it? A quick glance at CPU-Z and Antutu does not seem to show anything regarding that.

    Comment


      FYI

      Tried this just to see what would happen on my CX-921 - with the 6gb parameter file set all I won was penguins - but with the 2gb parameter file - it managed to get to the welcome / pick your language screen.
      But none of my USB input devices would allow for any kinda input at all.

      Like I said - just an FYI for and DEV's.

      Comment


        can i use this on rk3066 device? tested mk809 rom works on rk3066

        test

        not working. erorr when erase nand and flashing.

        can i use the kernal to 3066 only (finless for 3066 as that one not using ap6210 wifi chipset)
        Last edited by ahhl; 26 January 2014, 10:10.

        Comment


          Re: NEW - Finless ROM 2.0 - KitKat 4.4.2 for AP6210 wifi - BETA

          Originally posted by Bazmamfoo View Post
          Hey Bob,

          I'm using this ROM with Darrell's kernal at the moment. The problem I'm having is that all menus, icons etc are way too small since changing kernel.

          Last night I booted up and everything was back to normal size but tonight, small again. Any ideas what would cause this instability?

          Sent from my GT-I9505 using Tapatalk
          Anyone?

          Sent from my GT-I9505 using Tapatalk

          Comment


            Originally posted by Bazmamfoo View Post
            Anyone?

            Sent from my GT-I9505 using Tapatalk
            Read my README about build.prop and 1080 kernels please.... It tells you how to get large icons in 1080P.

            OK?

            Bob
            "Pzebacz im, bo nie wiedzą, co czynią"
            "Прости им, они не ведают, что творят"
            "Perdona loro perché non sanno quello che fanno"
            "Vergib ihnen, denn sie wissen nicht, was sie tun"
            "Vergeef hen want ze weten niet wat ze doen"
            "Pardonne-leur car ils ne savent pas ce qu'ils font"
            "Perdónalos porque no saben que lo que hacen"
            "Oprosti im, jer ne znaju Å¡to čine"
            "Forgive them as they know not what they do"





            Comment


              Re: NEW - Finless ROM 2.0 - KitKat 4.4.2 for AP6210 wifi - BETA

              Originally posted by Finless View Post
              Read my README about build.prop and 1080 kernels please.... It tells you how to get large icons in 1080P.

              OK?

              Bob
              Oh sorry. I must have missed that. I'll have a look tonight.

              Thanks Bob

              Sent from my GT-I9505 using Tapatalk

              Comment


                Originally posted by Finless View Post
                Read my README about build.prop and 1080 kernels please.... It tells you how to get large icons in 1080P.

                OK?

                Bob
                Hi Bob,

                I followed your instructions. I've renamed build.orig to build.prop and build.prop to build.old.

                I rebooted the device but doesn't appear to have made any difference. Am I missing something?

                Comment


                  Originally posted by Bazmamfoo View Post
                  Hi Bob,

                  I followed your instructions. I've renamed build.orig to build.prop and build.prop to build.old.

                  I rebooted the device but doesn't appear to have made any difference. Am I missing something?
                  Hello there,No your not doing it right.
                  First undo what you have just changed
                  so you are now back to where you sarted.
                  Now open build.prop & find the line ro.sf.lcd_density=160
                  edit that line so it now says ro.sf.lcd_density=240
                  save & reboot
                  Please consider making a Donation to freakTab

                  Comment


                    Re: NEW - Finless ROM 2.0 - KitKat 4.4.2 for AP6210 wifi - BETA

                    Originally posted by blinkone View Post
                    Hello there,No your not doing it right.
                    First undo what you have just changed
                    so you are now back to where you sarted.
                    Now open build.prop & find the line ro.sf.lcd_density=160
                    edit that line so it now says ro.sf.lcd_density=240
                    save & reboot
                    Ah you legend. That's done the trick!

                    Thanks a lot

                    Sent from my GT-I9505 using Tapatalk

                    Comment


                      kernels

                      Hi will these OC kernels work on Wasser 0.9 KitKat ROM for T-R42 MK819 RK3188 CPU.
                      Thanks

                      Comment


                        deleted by tyl
                        erroneous bug report

                        Comment


                          ro.sf.lcd_density=200

                          I think ro.sf.lcd_density=200 will be perfect on all of your ROMs for TV devices.
                          Just test it.
                          P.S. New ROM works great with kernel_stock/kernel_cpu1800h_gpu798h_ddr800/kernel_AP6210_FHD(with radiator on the chip).

                          Sorry for my bad English.

                          Comment


                            model T = RK3188-T

                            Hey Bob with your distrib and your kernel_cpu1800h_gpu798h_ddr720 I clock my crap T model CPU to 1,4GHz
                            woooooooooooooooo
                            its crap RK3188-T model clocked to 1.2GHz stock on GK525.
                            What do you think about that ?
                            All other kernel gave me only 1.2GHz speed
                            Well, I can see the CPU speed with CPU-Z but do you know how I can check the ram / gpu speed ?
                            Regards

                            Comment


                              Originally posted by ToBe View Post
                              Tested it with MK908II. My projector takes the 1080p. Antutu also shows it to be 1080p. Score was 1700. Wifi works. BT not tested. In my opinion the user interface is more 'sluggish' then the 720p kernel supplied in the start post.
                              I have done some more testing. I noticed that when i only flash the kernel, the performance is not optimal at all. Like i said above, it seemed more sluggish. But when i did a full nand erase and then flashed the whole shebang (this rom with the same kernel from darrelr), it's actually giving a huge performance increase!

                              I read somewhere it's not necessary to flash everything if you switch kernel, but from my experience it does make a difference. Is that normal, or am i seeing ghosts?

                              Also on another note, i tried the 1080p kernels for this rom from Bob, but they are not as performant as the one from darrelr in this thread. Performance as in choppy video playback and user interface i mean.
                              How can this be? I thought bob's kernels were done with the same method?
                              --
                              MK908II T

                              Comment


                                Just a general question for you guys. I had a bricked MK802IV that wouldn't take any flashes even in MASK ROM mode. However I was able to succesfully flash with finless flash tool and this Kit Kat rom. I tried flashing back down to NEOrom but it failed and bricked my device again. Is there any explanation for this?

                                When I try to flash with NEOrom the device reboots during flash and it becomes a unrecognized USB device, where as if I flash this kitkat rom with finless flash tool it goes all the way through. I tried flashing a 4.2.2 rom with this flash tool and it failed as well.

                                Comment

                                Working...
                                X