Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

NEW - Lollipop - wasser firmware 3.0.6 for Minix Neo X7

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by Daz View Post
    First thanks Wasser for your efforts. Ive been using this for sometime and by far the best rom ive tried to date.

    Ive since ran out of app space. Is there any other parameter files I can use... or parhaps an alternative solution?
    They are in this thread, I'm using 4gig. Have to re-flash rom and all thought to apply. Use titanium to backup and restore

    Comment


      Originally posted by Cantenna View Post
      They are in this thread, I'm using 4gig. Have to re-flash rom and all thought to apply. Use titanium to backup and restore
      Cheers but any idea where? Ive followed the full thread since the beginning but seemed to have missed it. Dont scan through for me but if you could advise approximatly it would be handy

      Comment


        Check this post



        Sent from my Nexus 7 using Tapatalk
        900Supersport

        900supersports FreakTab rkROMkitchen

        900supersports guide to working-RK-ROMs

        Under Construction 900supersports guide to working MediaTek ROMS

        Struggling for time at the moment, but will try and drop by when I can.

        If you would like to support my ROM development then please visit my Google site donate page where you can make a paypal donation

        freaktab developer

        Proof that you're never to old to learn. Sometimes too old to remember though.

        Comment


          Originally posted by 900supersport View Post
          Check this post



          Sent from my Nexus 7 using Tapatalk
          Perfeck... thankyou muchly

          Comment


            So far seems to be a great ROM. Really impressed. However I'm having a similar problem that I had on finless 1.8 with oc kernel set at 1800 max . when antutu gets to Testing CPU Float Performance at around 27% using either version of Antutu it force closes or gives me the message that antutu stopped responding... I had this problem before and therefore can't run a full antutu test with the full of kernel supplied. If I use no frills and set Max at 1608 it will complete test. This is the only app so far that I can remember that thus happens to. Other than that with cpu Max set at 1608 I am getting 19108 ATM but really want to know why this is happening, I must know what antutu score I'd be getting with Max set at 1800. If I remember correctly I had to set no frills at 1704 or whatever it is with the 1800 oc kernel on finless but we don't have that option with this kernel. Someone help me with this! Molle my man! How you getting that score again? And antutu completes test with you?! Like I day it force closes @ 1800mhz although it still shows as testing in taskbar it doesn't complete the test. Thanks

            Sent from my GT-I9505 using Tapatalk

            Comment


              Originally posted by Smokez View Post
              So far seems to be a great ROM. Really impressed. However I'm having a similar problem that I had on finless 1.8 with oc kernel set at 1800 max . when antutu gets to Testing CPU Float Performance at around 27% using either version of Antutu it force closes or gives me the message that antutu stopped responding... I had this problem before and therefore can't run a full antutu test with the full of kernel supplied. If I use no frills and set Max at 1608 it will complete test. This is the only app so far that I can remember that thus happens to. Other than that with cpu Max set at 1608 I am getting 19108 ATM but really want to know why this is happening, I must know what antutu score I'd be getting with Max set at 1800. If I remember correctly I had to set no frills at 1704 or whatever it is with the 1800 oc kernel on finless but we don't have that option with this kernel. Someone help me with this! Molle my man! How you getting that score again? And antutu completes test with you?! Like I day it force closes @ 1800mhz although it still shows as testing in taskbar it doesn't complete the test. Thanks

              Sent from my GT-I9505 using Tapatalk

              I get 19607 on Antutu with OC Kernel

              Just tested again using fux clock settings/changes and got 19667

              Comment


                xposed is awesome. Just discovered "immerse me" tweak. perfect!

                This is a great rom Wasser. Thank you.

                Comment


                  Re: KitKat-4.4.2 for Minix X7

                  Click image for larger version

Name:	uploadfromtaptalk1391313777416.jpg
Views:	1
Size:	43.4 KB
ID:	432887 trying to upgrade the kernel through reboot. Doenst seem to be working. See pic. Please advise.

                  Sent from my HTC PH39100 using Tapatalk

                  Comment


                    Originally posted by queonda View Post
                    [ATTACH]5136[/ATTACH] trying to upgrade the kernel through reboot. Doenst seem to be working. See pic. Please advise.

                    Sent from my HTC PH39100 using Tapatalk
                    use the flash tool that comes with the rom

                    Comment


                      Originally posted by Smokez View Post
                      Molle my man! How you getting that score again? And antutu completes test with you?! Like I day it force closes @ 1800mhz although it still shows as testing in taskbar it doesn't complete the test.
                      Each device is unique and some oc better than others. The CPU in your particular device, unfortunately, appears to be unstable in speeds over 1608MHz. AnTuTu really stresses all components to the limit and if your device can't handle it @1800MHz, you'd better avoid going that high. AnTuTu also includes a longer stress test. Try that with both 1800 and 1608 and see what happens.

                      When I was still on JB-based ROMs and ran self-built kernels, I found out my X7 could pass AnTuTu with 1920/800/798 kernels.
                      NVidia Shield TV 2015 16 GB || Stock
                      NVidia Shield TV 2017 16 GB || Stock
                      Buy me a beer?

                      Comment


                        Originally posted by Daz View Post
                        First thanks Wasser for your efforts. Ive been using this for sometime and by far the best rom ive tried to date.

                        Ive since ran out of app space. Is there any other parameter files I can use... or parhaps an alternative solution?
                        please take a look at earlier post you will find other parameter files!
                        http://www.freak-tab.de/wasser/btn_donate.gif

                        You can make a donation if you find my work useful

                        Comment


                          Originally posted by queonda View Post
                          [ATTACH]5136[/ATTACH] trying to upgrade the kernel through reboot. Doenst seem to be working. See pic. Please advise.

                          Sent from my HTC PH39100 using Tapatalk
                          it looks like you tried to flash kernel in cwm-recovery mode. It doesn't work because the zip was not made for cwm-recovery!

                          You should please use flash_image or flashtool which is included in firmware zipfile.
                          http://www.freak-tab.de/wasser/btn_donate.gif

                          You can make a donation if you find my work useful

                          Comment


                            Originally posted by Cantenna View Post
                            Update: Found the overclock kernel


                            Now I can up cpu to 1.8 Using fauxclock


                            Here is a question I havent seen answered yet, being that this device doesnt use battery, and is plugged into the wall all the time, why are we not just using a performance governor by default
                            in my opinion it's not good for the default setting!
                            http://www.freak-tab.de/wasser/btn_donate.gif

                            You can make a donation if you find my work useful

                            Comment


                              Originally posted by saddas View Post
                              Hi, Wasser!
                              When you plan to post your next KitKat release?
                              there're still some issues which i want fix for next release.

                              - Multi-disk mounting
                              - webcam
                              - volume +/-, mute


                              volume +/-, mute is already fixed, but the rest not yet. I will release it when these 3 issues are fixed!
                              http://www.freak-tab.de/wasser/btn_donate.gif

                              You can make a donation if you find my work useful

                              Comment


                                Originally posted by wasser View Post
                                there're still some issues which i want fix for next release.

                                - Multi-disk mounting
                                - webcam
                                - volume +/-, mute


                                volume +/-, mute is already fixed, but the rest not yet. I will release it when these 3 issues are fixed!
                                Audio manager & USB audio?

                                Comment

                                Working...
                                X