[ROM] OpenELEC for Amlogic-based TV boxes (M8, MXQ, TV110, MX2/G18)

[mannyp]

dos anyone know if this works with a board marked M9_v0.91 ?
it has M* on the plastic outside but the board says that?
Thanks

[al8782]

dos anyone know if this works with a board marked M9_v0.91 ?
it has M* on the plastic outside but the board says that?
Thanks

Is the remote round or square. The round remote has the rounded bottom.

Does it say Model M8 on the bottom of the box. And if you open up yours it my actually say, M9&M8_v0.91 as mine says the same thing but instead of 91 it says 92

[mannyp]

[ROM] OpenELEC for Amlogic-based TV boxes (M8, MXQ, TV110, MX2/G18)

Is the remote round or square. The round remote has the rounded bottom.

Does it say Model M8 on the bottom of the box. And if you open up yours it my actually say, M9&M8_v0.91 as mine says the same thing but instead of 91 it says 92

This is what my box looks like. And my board

[al8782]

[ATTACH]8632[/ATTACH][ATTACH]8633[/ATTACH]
This is what my box looks like. And my board

Mine is identical accept for the number on the inside. But others have different numbers then me and have had no problem installing this build.

[mannyp]

[ROM] OpenELEC for Amlogic-based TV boxes (M8, MXQ, TV110, MX2/G18)

Mine is identical accept for the number on the inside. But others have different numbers then me and have had no problem installing this build.

Ok. Thanks Al. If anyone else can confirm I will appreciate it.

[digihoe]

hi,
with this build my tuner is detected in web interface but i can't figure out how to scan the channels etc.
i enabled the tv adaptor in web gui.aded the network,but how to scan the dvb-t channels so that i can play them through xbmc iptv.looks like the web gui is different than shown here:

http://wiki.openelec.tv/index.php/Configuring_Tvheadend

thanks

Please head over to https://tvheadend.org for setup.

[jackmate]

[ROM] OpenELEC for Amlogic-based TV boxes (M8, MXQ, TV110, MX2/G18)

I have tried same in my openelec Apple TV 1 ,works fine but in m8 openelec ,in tv headend gui it's different and doesn't save network scan settings.
I think bug in tv headend in this build .
When I choose pre define county list ,it doesn't get saved ,hence zero mux.


Sent from my iPhone using Tapatalk

[luke71933]

It was my hdmi on tv causing audio issues. Build is flawless and amazing now everythibg working perfect.

[Krankie]

Can this output audio to spidf ?

[Carccaussa]

[ROM] OpenELEC for Amlogic-based TV boxes (M8, MXQ, TV110, MX2/G18)

Can this output audio to spidf ?

Yes I have it configured that way, although I am curious now, how do you switch between HDMI and SPDIF audio output?

Thanks


Sent from my iPhone using Tapatalk

[codesnake]

New build for M8

Today I have a little surprise for the community. Finally I have made the HDMI CEC working on M8 boxes! Now you can use the remote from your TV to control the XBMC.

Download links:

• for updating the exisiting installations: https://googledrive.com/host/0B4FNwq...148-update.tar
• for new installations from recovery: https://googledrive.com/host/0B4FNwq...el-320a148.zip

[siriusblack]

Thxs Codesnake

That it Amazing m8 👊

[dave_leeds]

Couple of questions regarding OpenELEC from a noob:

1. Is doing a clean install better than updating?
2. If there's no difference, can you skip updates to the most recent one or do they have to be done one after the other?

Thanks.

[codesnake]

Couple of questions regarding OpenELEC from a noob:

1. Is doing a clean install better than updating?
2. If there's no difference, can you skip updates to the most recent one or do they have to be done one after the other?

Thanks.

Clean install erases all your settings, installed addons etc, but update does not.
You can apply updates in any order, and even downgrade to a previous version.

[dave_leeds]

Many thanks. Are there any other improvements in the updates or just the things you've mentioned in this thread? None of it applies to my setup that's all.