[ROM] AlfaWise H96 PRO+ 3/16Gb - 3/32Gb - 3/64Gb - SCV7A 7.1.2 (DDR3/DDR4 and 9377 Wifi Chipset)

[nabilk]

anyone can help and tell me how can i replace the launcher with a stock launcher for example AmlLauncher_canzone_7.1(H96 PRO+ 26-08-17) ?
Btw i installed your rom on H96 Pro 2GB/16GB (NOT PLUS) and it's amazing , working so good . Thank you so much for your marvellous work.

[Oops]

You have to try to flash during reboot of box.
Also I bricked but this box can't brick so you have to be fast to run usbtools on reboot (in this time of connect to box)

Inviato dal mio SM-G935F utilizzando Tapatalk

Usb burning tool no longer detects the box. The start button remains grayed out all the time

[lkbfreak]

While using the box for a two weeks with this rom I have some pretty frequent reboots and my CPU temperature is between 70 and 80 °C. What could be the problem? Should I reflash? And I have random Google play services stopping.

[steve_eh]

used sd card to flash SCV4-A7.1.2-x64-Alfawise.H96.ProPlus
now, computer doesn't recognize, nothing on tv,
won't take a sd flash as far as i can tell
I managed to hook up an arduino as a serial ttl
got this

BL2 Built : 11:58:42, May 27 2017.
gxl gc3c9a84 - xiaobo.gu@droid05

set vdd cpu_a to 1120 mv
set vdd cpu_b to 1050 mv
set vddee to 1000 mv
Board ID = 1
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 816MHz - FAIL
DDR3 chl: Rank0 @ 816MHz - FAIL
DDR3 chl: Rank0 16bit @ 816MHz - FAIL
DDR4 chl: Rank0+1 @ 792MHz - FAIL
DDR4 chl: Rank0 @ 792MHz - FAIL
DDR4 chl: Rank0 16bit @ 792MHz - FAIL
DDR init failed...
Reset...
GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0; EMMC:0;READ:0;0.0;CHK:0;
TE: 170461

any other info needed to help me?

[nakti]

It would be great if users who have the new H96 pro plus takes pictures on the motherboard that have issues flashing the rom. And pictures of a working motherboard to know the difference when users buy a H96 pro plus box so that everyone can see and use the correct rom without bricking the box.

[Vaizen]

It would be great if users who have the new H96 pro plus takes pictures on the motherboard that have issues flashing the rom. And pictures of a working motherboard to know the difference when users buy a H96 pro plus box so that everyone can see and use the correct rom without bricking the box.

I got mine almost a month ago from gearbest and I just risked it all without opening the box and flashing the rom. Luckily enough everything went perfect and all works fine bluetooth, wifi, remote etc.

I would post a photo of my MB if someone is kind enough to guide me on how to open the h96 pro plus.

[mrpants]

Thin knife and take the plastic bit off the top..

[Modelman]

While using the box for a two weeks with this rom I have some pretty frequent reboots and my CPU temperature is between 70 and 80 °C. What could be the problem? Should I reflash? And I have random Google play services stopping.

It's probably the high temps causing all the problems. 80c is not good for stable running you should be aiming for less than 60c.

[superceleron]

used sd card to flash SCV4-A7.1.2-x64-Alfawise.H96.ProPlus
now, computer doesn't recognize, nothing on tv,
won't take a sd flash as far as i can tell
I managed to hook up an arduino as a serial ttl
got this

BL2 Built : 11:58:42, May 27 2017.
gxl gc3c9a84 - xiaobo.gu@droid05

set vdd cpu_a to 1120 mv
set vdd cpu_b to 1050 mv
set vddee to 1000 mv
Board ID = 1
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 816MHz - FAIL
DDR3 chl: Rank0 @ 816MHz - FAIL
DDR3 chl: Rank0 16bit @ 816MHz - FAIL
DDR4 chl: Rank0+1 @ 792MHz - FAIL
DDR4 chl: Rank0 @ 792MHz - FAIL
DDR4 chl: Rank0 16bit @ 792MHz - FAIL
DDR init failed...
Reset...
GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0; EMMC:0;READ:0;0.0;CHK:0;
TE: 170461

any other info needed to help me?

DDR init failed...
Try to flash by usb burning tool this one...

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s912/alfawise/678040-new-h96-pro-bricked-itself-after-a-couple-of-hours-use-help-me-diagnose-rescue-is-the-hardware-dead?p=680787#post680787

[steve_eh]

DDR init failed...
Try to flash by usb burning tool this one...

http://freaktab.com/forum/tv-player-...787#post680787

computer won't recognize it
tried 2 cables
reinstalling drivers
only thing I can get it to do is that bootloop i pulled off the serial connection

[lkbfreak]

It's probably the high temps causing all the problems. 80c is not good for stable running you should be aiming for less than 60c.

Yeah, I suppose the thermal is a culprit of the random reboots. But it's strange since I have installed only a few apps beside those included in the rom. Will see if reflash will make any difference. Thanks for the help anyway!

[tombraga]

Thin knife and take the plastic bit off the top..

i made nearly it without cutting with knife,
Carefeully (ok with knife) i solved the logo plastic inlay from the top and then made only a small cut then by kinking i got the middle part out and used the adesive residues (rests) to glued the tips once more. Was very easy.

see my posting #95 here http://freaktab.com/forum/tv-player-...are-mods/page7

I made in 2 boxes and could decrease the temperature about 10 º C

[Modelman]

i made nearly it without cutting with knife,
Carefeully (ok with knife) i solved the logo plastic inlay from the top and then made only a small cut then by kinking i got the middle part out and used the adesive residues (rests) to glued the tips once more. Was very easy.

see my posting #95 here http://freaktab.com/forum/tv-player-...are-mods/page7

I made in 2 boxes and could decrease the temperature about 10 º C

And if you are able to put a better heatsink on the CPU you will further reduce the temperature by another 10-15C. I've found fans are not necessary if you can keep below 60C.

[tampametal]

superceleron does this work with the banggood version of the H96 Pro+?

[superceleron]

superceleron does this work with the banggood version of the H96 Pro+?

Dunno... theirs to many H96 out there now... so is a nightmare to know the "true" one!