VORKE Z6 Android 7.1.2 Amlogic S912 TV BOX 3/32GB eMMC5.0 WIFI BT Gig LAN

[Jancales]

I'm back to the stock ROM.
No heating problems really b/c I opened up some of the vent holes on the side. Have an octopus dual fan under the box too.
Didn't really notice any pixelation .

It's not pixelation, but really heavy distortion.

If you want to see what I mean go in Kodi to Supremacy addon > new releases > Conor McGregor The notorious HD and at 1h25 minutes when he leaves on his crutches you will see what I mean.

The issue is of course not only with this movie, but thgis is just an example.

By the way superceleron advise to untick " erase bootloader" when flashing the image on a box other than GT1, and that is what I did.

[Deibi]

IT'S ALIVE

For those with the same issue, it's pin 19 and 20 you have to short from the big chip next to the processor.

Insert usb cable in box and pc, short the pins, plug in power adapter.

( pin 5 and 6 if you start counting from the processor side )

Edit : I miscalculated and it seems to be 18 and 19 ( but still 5 and 6 if starting from the processor ) and that is how it was with Beelink M18 as well.

It's a Sandisk eMMC by the way :~)

I have the same problem, did not need to give reset button?
I can not connect.
can you mark the pins in this photo?

[Jancales]

I have the same problem, did not need to give reset button?
I can not connect.
can you mark the pins in this photo?

And in this order.

Insert usb cable in box and pc, short the pins, plug in power adapter.

[Deibi]

I was doing it like that and nothing,
You also had everything turned off and only the blue button went on?

[Jancales]

I was doing it like that and nothing,
You also had everything turned off and only the blue button went on?

Yes, only blue button.

Use usb burning tool 2.0.8

Unplug everything .

start up usb burning tool

plug in usb in the lower usb port and in your pc.

short the 2 pins with a paper clip and keep them shorted while you plug in the power adapter.

You obviously need to have the world cup drivers installed on your pc.

By the way, Trebor posted that in his opinion it are the next 2 pins, but it has worked with every box I have with the one I marked.

So feel free to try with the following 2 pins.

[Deibi]

I do everything just like you tell me, I've tried with the other pins, and nothing.
it's frustrating.

this is what I am doing, the controllers are active.

Thank you very much for the help, I had to break it without wanting to.

[JoseM]

anyone can confirm that this tv-box plays netflix in HD (1080p) because i see in the youtube review and comment it does

https://www.youtube.com/watch?v=g7vd6XlUYgM

[panchovilla]

anyone can confirm that this tv-box plays netflix in HD (1080p) because i see in the youtube review and comment it does

https://www.youtube.com/watch?v=g7vd6XlUYgM

Does not play close to HD on my Z6. No matter what ROM.

[Jancales]

I do everything just like you tell me, I've tried with the other pins, and nothing.
it's frustrating.

this is what I am doing, the controllers are active.

Thank you very much for the help, I had to break it without wanting to.

Sorry to hear about your misfortune, but that is exactly how it worked for me, though my device is Z6 instead of Z6 Plus.

Do you use usb burning tool 2.0.8 and have the worldcup drivers properly installed?

I first tried with 2.0.5.15 and I heard the connection sound but nothing visible on the screen?

What happened that you bricked your box?

In my case it was because I had flashed a Tanix DDR3 rom, but I hadn't erased bootloader during the flash, as I read that recommendation in the instructions from superceleron GT1 ulimate scv1 thread.

Let's hope you get it alive again.

[kwabh]

Jancales@--can you explain the meaning of eMMC 5.0 . is it different from other Emmc ?

[Jancales]

Jancales@--can you explain the meaning of eMMC 5.0 . is it different from other Emmc ?

The number is the version, where 5.0 is the latest version, and as with all electronic components with every version there are improvements.

In the below link you will find everything you want to know about eMMC.

https://www.datalight.com/solutions/technologies/emmc/emmc-feature-comparison-by-version

[kwabh]

THANKS. Will you be able to check by PURE LUCK there is a USB 3.0 port

[Jancales]

I don't think it has USB 3.0, because both ar white color, and I'm sure if it had the manufacturer would have reported it.

According to Trebor on page 1 of this thread, the test results also confirm it's usb 2.0

[mishtag]

I think this happens because they use a shipping agent, who in turn does combined shipping to decrease the shipping price.

So the item is at the shipping agent, but he has to fill up a certain contingent before he can send out.

They could also ship every box separately, but then you would pay a higher price, because someone has to pay the shipping cost at the end of the day

The status didn't change since 5 days ago, and the least I expect from Geekbuying is to answer my emails and clarify the situation, but they don't, I hope that the tracking no is changed from the supplier and they don't know, so it might be shipped, but I need to know the new tracking no in order to track it.

[kwabh]

(jancales@thread 208)) Thanks . You confirm the exact type of USB .