If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have successfully installed CWM 6.0.0.x specific to Minix X7... CWM starts regularly but with what keys I can control it?? Unlike the stock recovery in which they operate the buttons on the original remote, with the CWM is not working or the wireless keyboard (obviously), nor the remote control ...
Help also to restore recovery stock would greatly appreciated ...
I followed the directions for flashing clockwork mod on my cx919. After clicking the flash rom button with only recovery checked a list of commands/actions appeared in the right hand box and it said everything was ok, then my cx919 rebooted. I waited several minutes after the reboot and then disconnected from my pc. Hooked up power to the cx919 and it booted up and ran fine, still with the stock rom (which does not have root) I then turned off the power, held the button on the side for about 6 0r 7 seconds after turning turning the power back on. I got a screen showing the android on his back with a red triangle (with an exclamation point in it) above his open chest. Any ideas on what the problem is?
I have successfully installed CWM 6.0.0.x specific to Minix X7... CWM starts regularly but with what keys I can control it?? Unlike the stock recovery in which they operate the buttons on the original remote, with the CWM is not working or the wireless keyboard (obviously), nor the remote control ...
Help also to restore recovery stock would greatly appreciated ...
You can control it with a usb keyboard.
Stock recovery can de flashed using the same way.
leolas.
REMEMBER, YOUR FEEDBACK IS VERY IMPORTANT TO US.
My devices: Minix Neo X7; Minix Neo X8-H , Minix Neo Z64W & Z64 (Sponsored by Minix)
MK902 & MK902II(Sponsored by RKM)
Beelink M8B & Beelink R89 (Sponsored by Beelink)
Tronsmart VEGA S89H (Sponsored by Gearbest.com)
MELE-PCG03 (Sponsored by Gearbest.com)Discount Coupon:MPCG03
Ainol Intel Z3735 MiniPC(Sponsored by Gearbest.com)
Thanks to them I can try to support your deviceshttp://freaktab.com/core/images/smilies/wink.png
Flash your stock recovery with rkdevelopertool, using the pc, or using flash_image binary.
leolas.
REMEMBER, YOUR FEEDBACK IS VERY IMPORTANT TO US.
My devices: Minix Neo X7; Minix Neo X8-H , Minix Neo Z64W & Z64 (Sponsored by Minix)
MK902 & MK902II(Sponsored by RKM)
Beelink M8B & Beelink R89 (Sponsored by Beelink)
Tronsmart VEGA S89H (Sponsored by Gearbest.com)
MELE-PCG03 (Sponsored by Gearbest.com)Discount Coupon:MPCG03
Ainol Intel Z3735 MiniPC(Sponsored by Gearbest.com)
Thanks to them I can try to support your deviceshttp://freaktab.com/core/images/smilies/wink.png
Hi , I have the MK902 which has the RK3188 chipset. I flashed the generic cwm recovery with the argos app I think it was called. The box boots into recovery and I can navigate it, but none of the options work. for backsups its says can find path, for install from zip it says cant find sd card. Any way to get a recovery built for our box? Thanks for your hard work! Edit- here is the link to my stock firware for MK902 http://www.rikomagic.com/en/download/do_1.html
Last edited by dan.kels.r; 02-01-2014, 02:00.
Reason: To post the link to firmware
I just want to make sure to use the right recovery image.
which one should I take for my MK908II (the one with the external antenna)? is it save to use the generic one?
Hi , I have the MK902 which has the RK3188 chipset. I flashed the generic cwm recovery with the argos app I think it was called. The box boots into recovery and I can navigate it, but none of the options work. for backsups its says can find path, for install from zip it says cant find sd card. Any way to get a recovery built for our box? Thanks for your hard work! Edit- here is the link to my stock firware for MK902 http://www.rikomagic.com/en/download/do_1.html
I just want to make sure to use the right recovery image.
which one should I take for my MK908II (the one with the external antenna)? is it save to use the generic one?
The generic one must work in almost all rk3188 devices (the one in androtab.info made by fun, please remember all, that I am using fun recovery bin, I tried to compile the recovery and I got a fail, so thanks a lot to fun, he made the hard work), but if you loose your kernel, you can't restore the Rom, if you have your stock Rom, I can try to make a cwm for your device
leolas.
REMEMBER, YOUR FEEDBACK IS VERY IMPORTANT TO US.
My devices: Minix Neo X7; Minix Neo X8-H , Minix Neo Z64W & Z64 (Sponsored by Minix)
MK902 & MK902II(Sponsored by RKM)
Beelink M8B & Beelink R89 (Sponsored by Beelink)
Tronsmart VEGA S89H (Sponsored by Gearbest.com)
MELE-PCG03 (Sponsored by Gearbest.com)Discount Coupon:MPCG03
Ainol Intel Z3735 MiniPC(Sponsored by Gearbest.com)
Thanks to them I can try to support your deviceshttp://freaktab.com/core/images/smilies/wink.png
Same thing here. I tried the generic for my mk802IV AP6210, flashed boots ok, but can't do backup. I appreciate if you can do something for this device (if it's possible of course). I can provide logs and can test. Thank you.
Sorry to be out of here for some time, but New development in kernel and a flu made me to be busy for some time, I will make new recoveries this afternoon.
leolas.
REMEMBER, YOUR FEEDBACK IS VERY IMPORTANT TO US.
My devices: Minix Neo X7; Minix Neo X8-H , Minix Neo Z64W & Z64 (Sponsored by Minix)
MK902 & MK902II(Sponsored by RKM)
Beelink M8B & Beelink R89 (Sponsored by Beelink)
Tronsmart VEGA S89H (Sponsored by Gearbest.com)
MELE-PCG03 (Sponsored by Gearbest.com)Discount Coupon:MPCG03
Ainol Intel Z3735 MiniPC(Sponsored by Gearbest.com)
Thanks to them I can try to support your deviceshttp://freaktab.com/core/images/smilies/wink.png
Abot the mk908 for finless 1.7a, it has a problem, his stock recovery have not a kernel inside, so I need to know what is exactly your mk908 model to make a cwm for it
leolas
REMEMBER, YOUR FEEDBACK IS VERY IMPORTANT TO US.
My devices: Minix Neo X7; Minix Neo X8-H , Minix Neo Z64W & Z64 (Sponsored by Minix)
MK902 & MK902II(Sponsored by RKM)
Beelink M8B & Beelink R89 (Sponsored by Beelink)
Tronsmart VEGA S89H (Sponsored by Gearbest.com)
MELE-PCG03 (Sponsored by Gearbest.com)Discount Coupon:MPCG03
Ainol Intel Z3735 MiniPC(Sponsored by Gearbest.com)
Thanks to them I can try to support your deviceshttp://freaktab.com/core/images/smilies/wink.png
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment