K-R42 - wasser firmware - JB Android 4.2.2

[wasser]

tv out doesnt work

it's fixed in 1.2.3 firmware which i will release at this weekend

[curlyboi]

will i have to reinstall the whole firmware or will just kernel be fine?

[wasser]

will i have to reinstall the whole firmware or will just kernel be fine?

you only need to flash new kernel

[curlyboi]

you only need to flash new kernel

thats good news anyway, i was trying to do the static mac fix, so i added a file 01mac.sh into /system/etc/init.d, with LF line endings, 755 chmod and this content:

#!/bin/sh

ifconfig eth0 hw ether 00:91:30:80:20:17

and its still not working. what to do?

[Hotabych]

I got old k-r42 - all is ok on last wasser`s firmware , but tv out is strange:
If I turn on box with tv out its starting ok, but resolution is 1080p and I see only left up corner of my launcher. So after booting in launcher I have to plug hdmi in then out and after that I receive normal screen in tv out mode.

[curlyboi]

I got old k-r42 - all is ok on last wasser`s firmware , but tv out is strange:
If I turn on box with tv out its starting ok, but resolution is 1080p and I see only left up corner of my launcher. So after booting in launcher I have to plug hdmi in then out and after that I receive normal screen in tv out mode.

interesting findings! i have also the old unit (jesurun dx05) and i have never tried this behaviour. i just noticed that the way tv out image is distorted changes when i switch PAL/NTSC and also i have to jiggle with the resolutions a bit untill i see the picture at all. nevertheless, it should be fixed this weekend, so that's that...

[heyyo]

I'm using the firmware 1.2.2 old revision on my k-r42.

I can enable wifi or ethernet.

1) In wifi or ethernet I can't open Google Play store:
The first time I launch it it asks me for my login/pwd. And then it closes itself
I tried also with a new fresh google account, same behavior.

2) I downloaded speedtest.apk from another source than play store and installed it:
Ping test works
download test works
upload doesn't start at all

3) ifconfig after speedtest in wifi

lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)


p2p0 Link encap:Ethernet HWaddr 02:77:0E:01:4D:98
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:849 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)


wlan0 Link encap:Ethernet HWaddr 00:77:0E:01:4D:98
inet addr:10.0.0.2 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::277:eff:fe01:4d98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12231 errors:0 dropped:98 overruns:0 frame:0
TX packets:6740 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:17189102 (16.3 MiB) TX bytes:705682 (689.1 KiB)

3) ifconfig after speedtest in ethernet

eth0 Link encap:Ethernet HWaddr 12:AE:4D:57:88:97 inet addr:10.0.0.5 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::10ae:4dff:fe57:8897/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16388 errors:4089685339 dropped:4089606664 overruns:802485 frame:4088882854
TX packets:7108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16764746 (15.9 MiB) TX bytes:709395 (692.7 KiB)
Interrupt:51 Base address:0x8000


lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Let me know wasser what Info I could provide to debug this.

[no_spam_for_me]

thats good news anyway, i was trying to do the static mac fix, so i added a file 01mac.sh into /system/etc/init.d, with LF line endings, 755 chmod and this content:

#!/bin/sh

ifconfig eth0 hw ether 00:91:30:80:20:17

and its still not working. what to do?

How I understood it, you have to use a configuration file and not handle it with ifconfig (most don't work like changing mask and so on because stored in prop...)

echo "00:91:30:80:20:17" > /data/misc/wifi/wlan_mac

If you use init.d scripts, start it with

#!/system/bin/sh

and dont use blank/empty line

[heyyo]

I just found what causing those strange bug with Google Play store and Speedtest.
I just modify my MTU to 1460 on eth0, and now speedtest uploads correctly and even playstore launch correctly.
So I suppose my router didn't like MTU 1500.

EDIT: I did the same modification on the wlan0, and it also works.

But I don't know howto make this modifications on MTU permanent.

[yxza]

How do I know if I'll have the old or new REVISION mvh Andreas

[wasser]

Hi,

not to apologize

OK I try it with cwm
1. wipe data/factory reset

-- Wiping data...
Formatting /data...
Formatting /cache...
Formatting /sd-ext...
No app2sd partion found. Skipping format of /sd-ext.
Error mounting /sdcard/.android_secure!
Skipping format...
Data wipe complete

2. wipe cache partition (really needing because of "Formatting /cache..."?)

-- Wiping cache....
Formatting /cache...
Cache wipe complete.

3. advanced -> wipe dalvik cache

Dalvik Cache wiped.

So, after reboot do you mean with "Mount NAND option" the
settings -> storage -> <Mount Nand Flash>?
I didn't get any symbol in the right screen corner?

The only think is, I've lost all my installed application (no matter I've a script to install them via adb BUT now I've the device as "Nexus 7" in my windos explorer...(OK "Connect to PC" AND "USB debugging"))

The fix is really easy
because it didn't work for me ....

Some other idea?

this issue will be fixed in 1.2.3 firmware

[no_spam_for_me]

...I just modify my MTU to 1460 on eth0... But I don't know howto make this modifications on MTU permanent.

How do you handle it? With witch command?
You can use an init.d script... have al look on my example...

[wasser]

thats good news anyway, i was trying to do the static mac fix, so i added a file 01mac.sh into /system/etc/init.d, with LF line endings, 755 chmod and this content:

#!/bin/sh

ifconfig eth0 hw ether 00:91:30:80:20:17

and its still not working. what to do?

firmware-1.2.3 supports static ethernet mac adress. for static mac adress you should add it in /etc/ethernet-mac

[heyyo]

How do you handle it? With witch command?
You can use an init.d script... have al look on my example...

ifconfig eth0 mtu 1460

[wasser]

1.2.3 firmware is released. Please test and post results!

Thanks