Pipo M6 Pro RileyROM 1.8 KitKat

[Meettya]

I think it's not a matter of frequency but a problem of CPU voltages that could affect 3G module power voltage in some way. What do you think about it?

I use kernel with stock CPU voltages, only 720 Ram and any way - 3G works poor when I at work (old Nokia have all 5 bars) and absolutely useless at train - even Pipo show bars - no Internet.
So, its looks like Pipo put bad madden 3G module and nothing case it work correctly
As for me - I plane to bay mobile Wi-Fi router.

[giouncino]

I use kernel with stock CPU voltages, only 720 Ram and any way - 3G works poor when I at work (old Nokia have all 5 bars) and absolutely useless at train - even Pipo show bars - no Internet.
So, its looks like Pipo put bad madden 3G module and nothing case it work correctly
As for me - I plane to bay mobile Wi-Fi router.

so, the problem could be the ram frequency?
I can try changing frequency untill I will find a good freq for the tablet!

[giouncino]

I use kernel with stock CPU voltages, only 720 Ram and any way - 3G works poor when I at work (old Nokia have all 5 bars) and absolutely useless at train - even Pipo show bars - no Internet.
So, its looks like Pipo put bad madden 3G module and nothing case it work correctly
As for me - I plane to bay mobile Wi-Fi router.

I thought that the CPU voltage regulators could be used to power 3G module too, so a modification of CPU voltage could affect also 3G input power...
I had not enough time to do more testing!

[Senna01]

Improve performance

Alright, I was able to change my M6 Pro to RileyRom Kitkat 1.8 using a Windows 7 PC. I noticed that its kinda sluggish on my tablet. Like there is a slight delay whenever i switch windows or playing Brave Frontier. It runs slower, maybe its because of the default resolution? Is there a way to to use Normal resolution? And any other settings that I need to change to improve performance?

Thanks.

[giouncino]

Alright, I was able to change my M6 Pro to RileyRom Kitkat 1.8 using a Windows 7 PC. I noticed that its kinda sluggish on my tablet. Like there is a slight delay whenever i switch windows or playing Brave Frontier. It runs slower, maybe its because of the default resolution? Is there a way to to use Normal resolution? And any other settings that I need to change to improve performance?

Thanks.

strange...
kitkat roms are a lot faster than JB even with stock "parameters".
To improve performance you can use one of my mod kernels. It will further improve general performance enough.

[Senna01]

Alright. Will try out one of your Mods. Hopefully it will make the performance a lot better.

Thank you! Will update you soon.

[fokemon]

Now I had stock kernel for few days. 3g seems to be quite nice, even seems that hw of pipo cant make it work really well. Feels bit slower, and battery goes out bit faster. But usable.

[giouncino]

Now I had stock kernel for few days. 3g seems to be quite nice, even seems that hw of pipo cant make it work really well. Feels bit slower, and battery goes out bit faster. But usable.

Hey, stay tuned!
Because some chinese modders are preparing modded ROMs (as far as I know not for m6pro at the moment unfortunately...) that make 3G, Wifi and GPS works like none of previous roms!
These mods seeem encouraging...

[fokemon]

Sounds excellent!!! Waiting...

[claro966]

Very goooood!!!!

Inviato dal mio M6Pro utilizzando Tapatalk

[redhatperl]

Hey, stay tuned!
Because some chinese modders are preparing modded ROMs (as far as I know not for m6pro at the moment unfortunately...) that make 3G, Wifi and GPS works like none of previous roms!
These mods seeem encouraging...

Let it come! I'm eagerly waiting for this

[zvezdopad]

Re: kernels

Hallo friends!
Which kernel give largest battery life?
kernel_kitkat_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW?

[giouncino]

Hallo friends!
Which kernel give largest battery life?
kernel_kitkat_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW?

Yes, but you need a lucky CPU to have a stable tablet. To verify this, the only thing is try!

[Ipolit]

I would appreciate any help with problem that happened after process of flashing this ROM. I followed instructions from first post (instructions from .pdf file from zipped file) and flashing was painless (everything was fine, without a problem). After flashing, tablet rebooted automatically, but it didn't boot to kitkat. It freezes on boot image that says "Pipo interactive media android 4.4.2", and in bottom right corner are two images (icons), one is android 4.4.2 icon, other is RK3188 (A9) icon.
PC won't recognize it because it freezes, and I can't re-try flashing or anything else with tools that I got with ROM.

Please help.

[giouncino]

Did you try with reset pinhole?
And switch on again?
Sometimes with first boot after flashing this could happen.