Pipo M6 Pro RileyROM 1.8 KitKat

[giouncino]

yes, but certainly it's not turning in deep sleep

NO!
you're wrong: deep sleep AND 3G are working properly with the kernels posted here:

http://www.freaktab.com/showthread.php?7871-Binary-patched-kernels-for-Pipo-models/page38

post #749

[heisenberg]

I turned back to Riley 1.6.1 the signal strength of wifi seems to be MUCH better. How I tested:
watching youtube HD Videos with both roms on the same place in my house.
With 1.8 every HD video is displayed only in sd and even stucks.
With 1.6.1 every HD video plays flewless and loading the video very fast in advance.

I would like to come back to KitKat. Is there any reason, why my signal is so much worse?

[valerima]

JB vs KK

I turned back to Riley 1.6.1 the signal strength of wifi seems to be MUCH better. How I tested:
watching youtube HD Videos with both roms on the same place in my house.
With 1.8 every HD video is displayed only in sd and even stucks.
With 1.6.1 every HD video plays flewless and loading the video very fast in advance.

I would like to come back to KitKat. Is there any reason, why my signal is so much worse?

The one rom did not which not tried yet is 1.9 official from 16042014. Custom rom is still outstanding. ;o(
I see that rom creators left it aside due to Kitkat.
However I do guess some improvements are there. Anyone tried this stock rom?

[mmm11]

NO!
you're wrong: deep sleep AND 3G are working properly with the kernels posted here:

http://www.freaktab.com/showthread.php?7871-Binary-patched-kernels-for-Pipo-models/page38

post #749

but it was just the reason why i switched back to the stock kernel !!!

which one do you have installed ?
this would be a greatest turn for me!!!

edit: i had this one installed, kernel_GPS_1.3_cpu_stock_gpu600_ddr648
perhaps the new versions make the wonder, trying right

[giouncino]

but it was just the reason why i switched back to the stock kernel !!!

which one do you have installed ?
this would be a greatest turn for me!!!

edit: i had this one installed, kernel_GPS_1.3_cpu_stock_gpu600_ddr648
perhaps the new versions make the wonder, trying right

I'm currently using this one:

https://www.dropbox.com/s/3bv63c3adxkawsn/kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr744.zip

but all the kernel 1.4 I've prepared have 3G and deep sleep perfectly working!

You can also install these kernels over kitkat stock rom.

[mmm11]

I'm currently using this one:

https://www.dropbox.com/s/3bv63c3adxkawsn/kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr744.zip

but all the kernel 1.4 I've prepared have 3G and deep sleep perfectly working!

You can also install these kernels over kitkat stock rom.

yep it's working without problem... sorry for my opposition

unfortunately the lower voltage kernels are not working for me, I use the 1325mv 648ddr, but seems not to be a big headache
thanx again

[giouncino]

yep it's working without problem... sorry for my opposition

unfortunately the lower voltage kernels are not working for me, I use the 1325mv 648ddr, but seems not to be a big headache
thanx again

try using higher frequency for the ram, you can increase performance a lot!

[mmm11]

try using higher frequency for the ram, you can increase performance a lot!

well.... in the night i tried gaming with interchanging kernels... result: the stable version once working, even that, is now not starting: the tablet remains (more than 15 min.) in the borealis aurora screen of riley and just won't start...
i tried flashing over and over but with the same results.... what now?

[heisenberg]

well.... in the night i tried gaming with interchanging kernels... result: the stable version once working, even that, is now not starting: the tablet remains (more than 15 min.) in the borealis aurora screen of riley and just won't start...
i tried flashing over and over but with the same results.... what now?

You can try to flash the stock rom, with the original tools from Pipo. If that one is booting, you can try riley again.

[jsager]

Re: Pipo M6 Pro RileyROM 1.8 KitKat

You can try to flash the stock rom, with the original tools from Pipo. If that one is booting, you can try riley again.

After flashing kernels over and over my tablet became unstable and ended up in a boot loop. I eventually got it booted up but was never successfully able to use the over clocked ROMs except for ram. Even then I would get random reboots and sod's. I ended up backing up my data, wiping the tablet and doing a fresh Reilly KK ROM install. After that I found I was able to use the overclocked maakie ROMs withe complete stability. I freshly reinstalled my apps and only restored the app data. Haven't had to reboot yet in over a week.

Sent from my Galaxy Nexus using Tapatalk

[porthos]

Odp: Pipo M6 Pro RileyROM 1.8 KitKat

After flashing kernels over and over my tablet became unstable and ended up in a boot loop. I eventually got it booted up but was never successfully able to use the over clocked ROMs except for ram. Even then I would get random reboots and sod's. I ended up backing up my data, wiping the tablet and doing a fresh Reilly KK ROM install. After that I found I was able to use the overclocked maakie ROMs withe complete stability. I freshly reinstalled my apps and only restored the app data. Haven't had to reboot yet in over a week.

Sent from my Galaxy Nexus using Tapatalk

What maakie rom did you install?

Wysłane z mojego M6Pro przy użyciu Tapatalka

[jsager]

What maakie rom did you install?

Wysłane z mojego M6Pro przy użyciu Tapatalka

Using giouncino's overclocked kernel:

kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr768

Here's the post where the link is:

http://www.freaktab.com/showthread.php?7871-Binary-patched-kernels-for-Pipo-models&p=178152&viewfull=1#post178152

Been rock solid for me (thus far).

[porthos]

Odp: Pipo M6 Pro RileyROM 1.8 KitKat

Using giouncino's overclocked kernel:

kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr768

Here's the post where the link is:

http://www.freaktab.com/showthread.php?7871-Binary-patched-kernels-for-Pipo-models&p=178152&viewfull=1#post178152

Been rock solid for me (thus far).

I use the same - for me most stable so far.

Wysłane z mojego M6Pro przy użyciu Tapatalka

[mmm11]

I use the same - for me most stable so far.

Wysłane z mojego M6Pro przy użyciu Tapatalka

i tried the same, got to go back to ddr648

[GZD]

Using giouncino's overclocked kernel:

kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr768

Here's the post where the link is:

http://www.freaktab.com/showthread.php?7871-Binary-patched-kernels-for-Pipo-models&p=178152&viewfull=1#post178152

Been rock solid for me (thus far).

use the same kernel as you before. everything is very good. fast and speed. but I start to meet sleep dead if I leave the pad sleep for 8 hours. Back to makkie one. no problem. not really sure how to solve that.