Pipo M6 Pro RileyROM 1.8 KitKat

[lacanadio]

Home button stopped working, browser crashes too

This started a while back on 1.8. I thought flashing to 1.8.2 would cure, but after restoring apps and data, it came back. Home button "clicks" but doesn't do anything. Browser starts and dies silently. Any ideas on how to troubleshoot?

Thanks,
Bob

[Almar]

Flashing stock rom

(it's better to write in english here)

You need to use the STOCK flash tool (not the finless one).
You can find it here:
http://chinagadgetsreviews.blogspot....-tool-v17.html

That's exactly what I've done, I used the Rockchip batch tool 1.7, not the finless, but flashing fails; I will do another attempt.

[darkdragon]

hey guys..

i just flashed rileyrom from post #1 everything worked fine thanks to the detailed description

it is suppposed to be 1.8.2 but under info-about tablet it says build number Rileyrom 1.8.1

did i get the link wrong?? the downloaded zip folder said 1.8.2 as well??

i want the 1.8.2 version because my signal is now only 3g..

thanks for helping

[Almar]

That's exactly what I've done, I used the Rockchip batch tool 1.7, not the finless, but flashing fails; I will do another attempt.

These are logs of rockchip batch tool v. 1.7 using restore/upgrade:
**********Restore Action**********
**********Restore Start Total<1>**********
<Layer 3-1-1> Test Device Start
<Layer 3-1-1> Test Device Success
<Layer 3-1-1> Lowerformat Device Start
<Layer 3-1-1> Lowerformat Device Success
<Layer 3-1-1> Test Device Start
<Layer 3-1-1> Test Device Success
<Layer 3-1-1> Check Chip Start
<Layer 3-1-1> Check Chip Success
<Layer 3-1-1> Get FlashInfo Start
<Layer 3-1-1> Get FlashInfo Success
<Layer 3-1-1> Prepare IDB Start
<Layer 3-1-1> Prepare IDB Success
<Layer 3-1-1> Download IDB Start
<Layer 3-1-1> Download IDB Success
<Layer 3-1-1> Reset Device Start
<Layer 3-1-1> Reset Device Success
<Layer 3-1-1> Wait For Loader Start
<Layer 3-1-1> Wait For Loader Success
<Layer 3-1-1> Test Device Start
<Layer 3-1-1> Test Device Success
<Layer 3-1-1> Download Firmware Start
<Layer 3-1-1> Download Firmware Fail
**********Restore Done Success<0> Fail<1> Time<38517>ms**********

**********Upgrade Action**********
**********Upgrade Start Total<1>**********
<Layer 3-1-1> Test Device Start
<Layer 3-1-1> Test Device Success
<Layer 3-1-1> Check Chip Start
<Layer 3-1-1> Check Chip Success
<Layer 3-1-1> Get FlashInfo Start
<Layer 3-1-1> Get FlashInfo Success
<Layer 3-1-1> Prepare IDB Start
<Layer 3-1-1> Prepare IDB Success
<Layer 3-1-1> Download IDB Start
<Layer 3-1-1> Download IDB Success
<Layer 3-1-1> Reset Device Start
<Layer 3-1-1> Reset Device Success
<Layer 3-1-1> Wait For Loader Start
<Layer 3-1-1> Wait For Loader Success
<Layer 3-1-1> Test Device Start
<Layer 3-1-1> Test Device Success
<Layer 3-1-1> Download Firmware Start
<Layer 3-1-1> Download Firmware Fail
**********Upgrade Done Success<0> Fail<1> Time<22230>ms**********
Here a snapshot of rk tool:

What is wrong?

[giouncino]

Did you use the original cable?
Many times the problem is due to bad connection between tablet and USB cable...

[Billcnz]

Or maybe your Windows version, it's not 8.1 compatible

Sent from Tapatalk on my m6pro running Riley ROM 1.8 KK

[kestosippi]

Is it possible to enable ad-hoc wifi some way with this KitKat?
I have Nokia n8 and Joikuspot-internet sharing only ad-hoc type.

[MartyK]

Is it possible to enable ad-hoc wifi some way with this KitKat?
I have Nokia n8 and Joikuspot-internet sharing only ad-hoc type.

I have the exact same question!

[Almar]

Did you use the original cable?
Many times the problem is due to bad connection between tablet and USB cable...

I've used the original cable that perfectly goes with finless tool, flashed three time RR 1.8, RR 1.8.1 and finally RR 1.8.2 after flashing fail of stock rom. I think it's impossible a malfunction of cable with RK tool. My OS is Windows 7, maybe an error in the file of stock rom?
Ultimately I wil send the tablet in RMA (WiFi don't turn on) with RR KitKat rom.

[giouncino]

I've used the original cable that perfectly goes with finless tool, flashed three time RR 1.8, RR 1.8.1 and finally RR 1.8.2 after flashing fail of stock rom. I think it's impossible a malfunction of cable with RK tool. My OS is Windows 7, maybe an error in the file of stock rom?
Ultimately I wil send the tablet in RMA (WiFi don't turn on) with RR KitKat rom.

I can suggest you to try to download again the rom (even if the flashtool test it before loading...).
I cannot see the screenshot: did you use Batchtool 1.7?

[Almar]

I can suggest you to try to download again the rom (even if the flashtool test it before loading...).
I cannot see the screenshot: did you use Batchtool 1.7?

Yes batch tool 1.7, the screenshot is also a link to imageshack where you can see the original.

[giouncino]

Yes batch tool 1.7, the screenshot is also a link to imageshack where you can see the original.

You can try one of the other stock rom in the pipo.cn homepage.
Even if it marked as "3G" it is suitable for non 3G version too!
as this (latest) one:

https://docs.google.com/file/d/0B1gW69qoDilEdTBXbmUzbHF2SWc/edit

Remember to disable "usb debugging" too

[Almar]

You can try one of the other stock rom in the pipo.cn homepage.
Even if it marked as "3G" it is suitable for non 3G version too!
as this (latest) one:

https://docs.google.com/file/d/0B1gW69qoDilEdTBXbmUzbHF2SWc/edit

Remember to disable "usb debugging" too

Nothing to do, with rk tool and the rom downloaded from your link all is perfect when testing the tablet, but when it came to "downloading firmware" suddenly firmware download fails. That's for me inexplicable!

[giouncino]

I've no other ideas...

The only one more thing could be: try flashing with wall charged connected. Sometimes it helps...

This is my last idea...

[Almar]

I've no other ideas...

The only one more thing could be: try flashing with wall charged connected. Sometimes it helps...

This is my last idea...

Every time I flash, the wall charger is ever connected, it's the first thing I do. Well I'll send the tablet for repair with RR KK rom, do you think they will refuse the warranty?