Kitkat Kernels for All (well most!)

[d33]

Hello. Dear d33, I'm using your kernel (kernel_KK_v4.2.2_TVBOX_RTL8188_Sd.img). It is fantastic, now the frequency of my kr3188t not 1.4GHz, 1,6GHz. It is very good. In Antutu good grades. Thank you for the work done. But WiFi and Bluetooth are not working. You don't plan to add in your kernel support RTL8188 WiFi and Bt MT6622? It would be very good. Maybe you can help my Dmesg and Gpio dump stock kernel.
xt-q7-v10(2013-12-05)
rk3188t
wifi realtek rtl8188eus
Lan rtl8201f
HDMI ITE IT66121FN
AV drv632
Sound rockchip rk1000-s
bluetooth mediatek mt6622n

https://yadi.sk/d/K95ecN3mannX9

Sorry for the bad English.

Can you provide DMESG from my kernel to see where the errors are?

[Max One]

I've rebuilt carefully, using a tvbox config, and re-uploaded -> test3. Can you provide DMESG of test2 and 3?

test 3 will not boot. test2dmesg.txt <-- dmesg of test 2

[d33]

test 3 will not boot. [ATTACH]8057[/ATTACH] <-- dmesg of test 2

GPIO dumps from stock please.

I'm using

Power -> RK30_PIN3_PB5 (269)
Reset -> not used
wake -> RK30_PIN3_PC7 (279)
wake_host -> RK30_PIN3_PC6 (278)
RTS_GPIO -> RK30_PIN1_PA3 (195) - LOW

[Max One]

GPIO dumps from stock please.

I'm using

Power -> RK30_PIN3_PB5 (269)
Reset -> not used
wake -> RK30_PIN3_PC7 (279)
wake_host -> RK30_PIN3_PC6 (278)
RTS_GPIO -> RK30_PIN1_PA3 (195) - LOW

Gpio dumps from lonely2k

http://www.freaktab.com/showthread.php?6120-J22-TVSTICK-with-AP6210-wifi&p=101015&viewfull=1#post101015

[d33]

I've built a tester for RTL8188/MT6622 using the GPIO values in the dumps provided by @Brahner

Download

[d33]

Gpio dumps from lonely2k

http://www.freaktab.com/showthread.p...l=1#post101015

<4>[ 4449.466758] GPIO gpio3 268 wifi_power
<4>[ 4449.465868] GPIO gpio2 231 wifi reset

Power -> RK30_PIN3_PB4 (268)
Reset -> RK30_PIN2_PA7 (231)


<4>[ 4449.466783] GPIO gpio3 269 ap6210_poweron
<4>[ 4449.467010] GPIO gpio3 278 ap6210_wake
<4>[ 4449.467035] GPIO gpio3 279 ap6210_wake_host
<4>[ 4449.465015] GPIO gpio1 195 ap6210_rts

Power -> RK30_PIN3_PB5 (269)
Reset -> not used
wake -> RK30_PIN3_PC7 (279)
wake_host -> RK30_PIN3_PC6 (278)
RTS_GPIO -> RK30_PIN1_PA3 (195) - LOW

[d33]

Re-compiled AP6210-alt ('J22') with wake and wake host swapped - here

[Max One]

Re-compiled AP6210-alt ('J22') with wake and wake host swapped - here

wifi is working and bluetooth is not working. :S

[d33]

Kitkat Kernels for All (well most!)

wifi is working and bluetooth is not working. :S

Can you post DMESG ? I seem to have lost all BT regardless of chipset!

Gpio dump too if you can


Using my ipad so apols for any stupid ios spelling 'corrections'

[Max One]

Can you post DMESG ? I seem to have lost all BT regardless of chipset!

Gpio dump too if you can


Using my ipad so apols for any stupid ios spelling 'corrections'

Gpio dump? i would but i dunno how to do it. Im sorry

test4dmesg.txt dmesg of testkernel 4

[Max One]

Sorry. Doublepost.

[d33]

Kitkat Kernels for All (well most!)

There's an iomux error so I need to see which GPIO is dodgy. Gpio dump easiest but I can debug


Using my ipad so apols for any stupid ios spelling 'corrections'

[superceleron]

hi there d33, great work on the kernels
I have a problem, your kernel kernel_KK_v4.2.5_MT5931 simple stays in boot loop on a the v5 cs968.
Can you have a look?

Regards.

[d33]

Re: Kitkat Kernels for All (well most!)

hi there d33, great work on the kernels
I have a problem, your kernel kernel_KK_v4.2.5_MT5931 simple stays in boot loop on a the v5 cs968.
Can you have a look?

Regards.

I suspect this means your SoC doesn't like the full gpu/cpu clock

[brahner]

Hello dear d33. Thanks that responded to the request. We are the owners Board XT-Q7-V10(on the forum http://4pda.ru/forum/index.php?showtopic=490384&st=4540) look forward to a full core. But I have no way to check your test kernel. I don't have HDMI. Only AV, no video. You can add support for AV?