Neomode Custom Rom MK809III Version 3.1 Android 4.4.2 *Update*

[pelias]

hello, I bought a 809III and installed the new version rom and not start after installed the old version rom and it works but with much lag and the usb does not work.
I tested the original rom and everything worked.
I appreciate any help
best regards

the old version works everthing but its very lags

[hockeyfan#1]

Compatibility question and Performace?

Thanks in advance for feedback. First time im posting. I am a noob, but learning slowly. Sorry if these questions don't make sense or posted in the wrong thread. Im really curious.

My questions are as follows:

1.) Will this Rom play nicely with my Android TV stick or will it brick it .

Specs:
MK809III QC802 RK3188T
AP6210 module
OS:Stock jelly bean

I purchased from Geekbuying

2.) How is the performance in XBMC? Is D33 kernel only way to go to have smooth HD streaming?

3.) Does this rom contain Rockchip eHomeMediaCenter? I use the RKRemoteControl apk. If not is there a recommended free app to substitute it?


Thx,

Hawkey

[ikerg]

Re: Neomode Custom Rom MK809III Version 3.1 Android 4.4.2 *Update*

Hi,

I'm trying to use the stick with an Appradio3. The problem is that the symbols are too small. Trying to change the dpi in build.prop will cause errors.

Is there any other possibility?

About 220 dpi would be a good solution.

Thank you!

Download xposed and appsettings. Set up 260dpi and you are done

Enviado desde mi GT-I9300 mediante Tapatalk

[jh4ns]

Hi Neo,

Can I use this rom on my mk802iv old wifi version?
I have been trying many rom combination with different kernel but no one give real good result,
some wifi is very slow, some got bugs.

Can you please recommend me which combination of rom and kernel is best for mk802iv old wifi?

I think ur rom is the best out there really hope it can work with mk802iv.

Thanks in advance,

[mechaone]

Re: Neomode Custom Rom MK809III Version 3.1 Android 4.4.2 *Update*

Hi Neo,

Can I use this rom on my mk802iv old wifi version?
I have been trying many rom combination with different kernel but no one give real good result,
some wifi is very slow, some got bugs.

Can you please recommend me which combination of rom and kernel is best for mk802iv old wifi?

I think ur rom is the best out there really hope it can work with mk802iv.

Thanks in advance,

Here is a Neo KK build specifically for the first generation of the MK802IV.

http://www.FreakTab.com/showthread.php?t=14706

MK802IV Old Wifi KitKat Neomode Custom Rom 3.6 FullHD

Sent from my SGH-I337M using Tapatalk

[Fedel]

Loading crash!!!

Hi mates!

I have AUXTEK T005 QUAD CORE 1.8Mhz Maali400 TV Stick which recognized as M809III.

I've decided to flash it by new Android 4.4.2 because there was 4.2.2 and I had some bugs with IPTV.
I found full working ROM only by Neomode NCR_3_MK809III_44 (thanks mate ) , but the Droid has lags. It doesn't want to use hardware acceleration, fullHD video stucks. I've tried to change kernel, but in any case except NCR_3_MK809I_44 stock kernel I have loop rebooting. Please help me to find right kernel for my device or well working ROM.

Thanks a lot.

[Fedel]

Hello Guys,

Here it is the New Neomode Custom Rom for the MK809III with Android 4.4.2.
Have Tested this Rom and everything Works like it should with MK809III Version 2 & 3.
The Rom comes with a SD Kernel and a DPI Setting of 160 and is Rooted.

What Works ?

- WiFi
- Bluetooth
- Rotation
- USB
- USB OTG

Software Included:
No-Frills CPU Control
Reboot App from Petrus
SuperSU (Root Access)
Terminal Emulator
FX FileExplorer
Chrome
Chrome UA

This Time the Rom has a Lot of new Features:
Volume Slider Works
Added Power Down Button to Navbar
Hide Navbar Button (Re enable it with Sliding from Top to Bottom)
5Point1 Multichannel
HDMI Passthrough
OC Kernels Included
(To Flash a OC Kernel press the Button in RKFlash Tool where Kernel is then you can Selec New Kernels from OCKernel Dir.)
1,2,4,6 GB Parameter Files Select before Flashing

Download:

New Version:

http://www.freak-tab.de/neomode/ncr_31_mk809III_kitkat.zip

Upload running please wait 1h.


Old Version:

http://www.freak-tab.de/neomode/NCR_3_MK809III_44.zip

Regards

Neomode

Hi Neo.

I have AUXTEK T005 QUAD CORE 1.8Mhz Maali400 TV Stick which recognized as M809III.

I've decided to flash it by new Android 4.4.2 because there was 4.2.2 and I had some bugs with IPTV.
I found full working ROM only by Neomode NCR_3_MK809III_44 (thanks mate ) , but the Droid has lags. It doesn't want to use hardware acceleration, fullHD video stucks. I've tried to change kernel, but in any case except NCR_3_MK809I_44 stock kernel I have loop rebooting. Please help me to find right kernel for my device or well working ROM.

Thanks a lot.

[josan420]

MK809III with MEDIATEK mt5931sa / mt6622n wifi/bt

Can u please make this ROM compatible with MK809III with MEDIATEK mt5931sa / mt6622n wifi/bt Chipsets?

[neomode]

There is one with Android 4.2.2.

Gesendet von meinem HUAWEI P7-L10

[josan420]

There is one with Android 4.2.2.

Gesendet von meinem HUAWEI P7-L10

Link please, i can't find it

[Fedel]

Hi Neo.

I have AUXTEK T005 QUAD CORE 1.8Mhz Maali400 TV Stick which recognized as M809III.

I've decided to flash it by new Android 4.4.2 because there was 4.2.2 and I had some bugs with IPTV.
I found full working ROM only by Neomode NCR_3_MK809III_44 (thanks mate ) , but the Droid has lags. It doesn't want to use hardware acceleration, fullHD video stucks. I've tried to change kernel, but in any case except NCR_3_MK809I_44 stock kernel I have loop rebooting. Please help me to find right kernel for my device or well working ROM.

Thanks a lot.

I've opened the device and found manufacturer of it. It is Netxeon BOX_V1.0_2014022. The plate is blue. I suggest that I have to back on 4.2.2. But the problem is I can't find stock 4.2.2 OS.

[jpservices01]

Not able to work with a multitouch TV screen

Hi All:

I have been trying to find a ROM that would support my Samsung Touch Overlay CY-TM40. So far the best behaviour I could get is a white spot that would click were it is when touching the screen yet I have been unable to move the white spot. I tried an IDC file but here too with no success (the white spot was changed into a white circle but here too not able to move it around).

In other threads there was a mention that the ROM could be moded with a insmod multitouch.ko. I have not been able to find this module for any of the ROM I have tried.

Now I am on this Neomode Custom Ro V3.1. I was full of hopes because this ROM is significantly larger than others and works very well and swiftly with my CX919 yet multitouch support is still not working.

The Samsung Overlay is actually manufactured by a sub-contractor in Korea call AFO it has an VID PID of 2576 0003.

Has anybody been able to drive a touch screen with Neomode's V3.1 ROM? Has anybody been able to get the multitouch.ko or similar module for this ROM? Any other useful hints?

Thanks in advance for any tip that would help me progress.

[individual]

What ROM to use for MK809IV stick?

New to ROMming... but, Will this work with MK809 IV Android 4.4.2 Mini PC 2GB/8G TV Box TV dongle Rk3188 Quad core HDMI ?

Thanks in advance!

[neomode]

Hello,

Have make a New Kernel with FullHD. Can anybody please Test it?

http://www.freak-tab.de/neomode/kernel.img

Regards
Neomode

[josan420]

Hello,

Have make a New Kernel with FullHD. Can anybody please Test it?

http://www.freak-tab.de/neomode/kernel.img

Regards
Neomode

I am downloading ROM after testing it i will post the result here

By the way will this rom work on MK809III with MEDIATEK mt5931sa / mt6622n wifi/bt Chipsets?