[ROM] OpenELEC for Amlogic-based TV boxes (M8, MXQ, TV110, MX2/G18)

[Jönke]

Here is my build for M8 , built from kerbers Openelec with new kernel

https://db.tt/ACWdPcsC

and 5.0.5 build, built from Codesnake Openelec

https://www.dropbox.com/sh/sng7yawj3djx2xx/AAAJmnx2zAiFpsFbFTmKZUVYa?dl=0

[codesnake]

M8 android tv box is 32 bit or 64 bit with openelec thanks if someone can helpme.

32-bit.

[finchauspe]

M8 S802 Amlogic Dead

I trying to get to life a MTBox. unfortunately I tried to flash with a wrong firmware and now, I cant install any firmware with standard method (.zip, factory_update_param.aml, recovery.img) the devise stop process at 10 % aproxly.
on the other hand I tried too with method with USB_Burning_Tool but the devise can turn on if it is connected via USB with PC.
So, I learnt I can burn a SDcard with bootloader.bin thru bootcarmaker program, but I can´t find a ROM .img with corresponding bootloader.bin. What can I do now?

[gtvdev]

HW DECODING ISSUE.

The dmesg log:

http://pastebin.com/THfNAjsv

[codesnake]

I trying to get to life a MTBox. unfortunately I tried to flash with a wrong firmware and now, I cant install any firmware with standard method (.zip, factory_update_param.aml, recovery.img) the devise stop process at 10 % aproxly.
on the other hand I tried too with method with USB_Burning_Tool but the devise can turn on if it is connected via USB with PC.
So, I learnt I can burn a SDcard with bootloader.bin thru bootcarmaker program, but I can´t find a ROM .img with corresponding bootloader.bin. What can I do now?

Just extract the bootloader.img from corresponding ZIP file and rename it. It is the bootloader.

[Kiralina]

Well this work for mac??

Here it is for mac:

http://www.macupdate.com/app/mac/25092/filezilla

[Kiralina]

Here is my build for M8 , built from kerbers Openelec with new kernel

https://db.tt/ACWdPcsC

and 5.0.5 build, built from Codesnake Openelec
https://www.dropbox.com/sh/sng7yawj3...FTmKZUVYa?dl=0

Thank you. I'll try them both.

[arico1234]

Here is my build for M8 , built from kerbers Openelec with new kernel

https://db.tt/ACWdPcsC

and 5.0.5 build, built from Codesnake Openelec
https://www.dropbox.com/sh/sng7yawj3...FTmKZUVYa?dl=0

Will that work on T8 box. Its same hardware as M8 i think .

[fatfreddiescat]

Codesnake, a big thank you for this ROM, I loaded it onto my MX2 and is by far the best I have tried, a great bit of work and very much appreciated.
Stay safe.

[codesnake]

Codesnake, a big thank you for this ROM, I loaded it onto my MX2 and is by far the best I have tried, a great bit of work and very much appreciated.
Stay safe.

Thank you for your support.

[fatfreddiescat]

No, really, Thank you

[dannydigital3000]

In need of expert advice

Hi Mate

How do I get the following firmware: -KOT49H.20141227 test-keys ?

A point in the right direction would be much appreciated. I've been searching the net like crazy so links are most welcome.......I have this on 1 of my M8 boxes and would like to add it to my other one. I've found some similar but I have remote issues not turning on/off when updated. Is it possible for me to copy firmware from 1 device to another?

cheers

[jeep52]

Many thanks codesnake .

[jeep52]

Here is my build for M8 , built from kerbers Openelec with new kernel

https://db.tt/ACWdPcsC

and 5.0.5 build, built from Codesnake Openelec
https://www.dropbox.com/sh/sng7yawj3...FTmKZUVYa?dl=0

Many thanks Jonke.

[finchauspe]

Just extract the bootloader.img from corresponding ZIP file and rename it. It is the bootloader.

I extract this bootloader and renamed. Then burned in a sd card, load then ROM and nothing. Stopped the process at 10 % aproxly