MK808 "all models" Finless 1.7

[Mandrake2]

(MK808B, rk903) after a day of average use:
BT OK
WIFI OK (at 39Mbps then stabilizes at 65Mbps)
streaming OK
Lockscreen OK
Small delays in the opening of the Play Store and System Settings.
The icons in the application launcher in the new APP are enormous.
Antutu (3.1.2) Wifi / off close app
1280x720 (navbar off) ---------- 1280x672 (navbar on)
Interactive 252-1.6 (see SetCPU max 1.2 ghz)--- Performance from 1.6 to 1.6 (1.4 ghz)
score: 9921 to 10015
ram: 1664 - 1653
CPU Int: 2154 -2147
Cpu float: 1606-1594
2D: 1324-1433
3D: 2310-2334
I / O: 550-560
Interactive performance or does not change anything with the navbar on a small gain in 2D/3D for the rest all the same.
So even if there is a problem with the rk3066 been reading the Times in frequency (always read at 1008Mhz), the test (Stock-Finless 1.6A / 1.7)
conclusions are two: the actual maximum is 1.2 Ghz or 1.4 Ghz, I do not know.
The rom is good and so far no problem freeze or reboot
Thanks again Bob for the work you do to make you enjoy using this mini pc android.

[trssho91]

Re: NEW - MK808 "all models" Finless 1.7 (Beta is over)

Amazing ROM!! The devices should be shipping with this. While the 1.5a and 1.6 were good and made the device usable, this rom makes it a pleasure to use as a daily driver 'casual PC'. The only thing I could ask for more would be usb bluetooth support, but I am starting to think thats not possible with this device on any rom (not that I am complaining, I couldn't be happier with how Finless unlocked this device for us). I do have one question, it seems on the ondemand or interactive governors the cpu never goes above 1.2GHz, however if you lock it on performance it goes to 1.4GHz. How can I get the device to use 1.4GHz without locking it on performance. I think my device would take the performance setting since I have upgraded the cooling - but it just doesn't feel right to have to run it at 100% all the time. Last thing I was wondering about, when the device is locked (screen, not governor and THANK YOU FOR THAT FEATURE!) - does the cpu scale down to goto sleep even if it is locked on performance? Thank you again for this ROM and the community help - as you can see, I am very excited about this.

Sent from my MK808 using Tapatalk 2

[leolas]

Amazing ROM!! The devices should be shipping with this. While the 1.5a and 1.6 were good and made the device usable, this rom makes it a pleasure to use as a daily driver 'casual PC'. The only thing I could ask for more would be usb bluetooth support, but I am starting to think thats not possible with this device on any rom (not that I am complaining, I couldn't be happier with how Finless unlocked this device for us). I do have one question, it seems on the ondemand or interactive governors the cpu never goes above 1.2GHz, however if you lock it on performance it goes to 1.4GHz. How can I get the device to use 1.4GHz without locking it on performance. I think my device would take the performance setting since I have upgraded the cooling - but it just doesn't feel right to have to run it at 100% all the time. Last thing I was wondering about, when the device is locked (screen, not governor and THANK YOU FOR THAT FEATURE!) - does the cpu scale down to goto sleep even if it is locked on performance? Thank you again for this ROM and the community help - as you can see, I am very excited about this.

Sent from my MK808 using Tapatalk 2

without full kernel sources is not possible at this moment, there are some overclocked kernels but only for mk808. We don't have support for the rest of wifi chipsets yet, but those cheap devices works very well at stocks frequencies, and if we overclock we must take care about our heat disipation.

[trssho91]

Re: NEW - MK808 "all models" Finless 1.7 (Beta is over)

Hey everyone, I think I just figured out something useful on the sleep function. The first time my device went to sleep I lost my keyboard and mouse despite being connected to a wireless network. It occurred to me that android will disable the wifi after a certain time of inactivity on my tablet, so I assumed maybe that was why the device was shutting down - it didn't see an active wifi connection. Since battery isn't a concern, I installed advanced wifi lock (free) and locked my wifi to always be on and I do not seem to have that issue anymore.

Sent from my MK808

[Finless]

Hey everyone, I think I just figured out something useful on the sleep function. The first time my device went to sleep I lost my keyboard and mouse despite being connected to a wireless network. It occurred to me that android will disable the wifi after a certain time of inactivity on my tablet, so I assumed maybe that was why the device was shutting down - it didn't see an active wifi connection. Since battery isn't a concern, I installed advanced wifi lock (free) and locked my wifi to always be on and I do not seem to have that issue anymore.

Sent from my MK808

It's easier to do than that. Go into settings>wifi and on the top right corner click the 3 dots and select advanced. Now you can set wifi sleep to never.

Bob

[kididaho]

Re: NEW - MK808 "all models" Finless 1.7 (Beta is over)



Jim
MK808 TapaTalk II

[trssho91]

Re: NEW - MK808 "all models" Finless 1.7 (Beta is over)

HAHA, of course I would miss the simple/quick fix - I work in IT afterall

Sent from my MK808

[miki74]

When restarting the device, it automatically starts usb lan. Need to enable and disable the ethernet.

[Mandrake2]

I had a problem of freeze due to busybox installer, so I had to install the rom again.
Now everything is fine, except that I noticed an anomaly:
Display ----> Sleep I put five minutes, but (watch in hand) after exactly 3 minutes go to sleep not 5 minutes. In wifi -> advanced Keep on Wifi During sleep should always be? so as not to turn off the mK? because if you ever put it on when I reactivated the wifi signal without bands and no connection with the writing, and if select Never the signal Always up, but freeze and auto switch off WIFI.

[bruncek]

I made a cwm flashabe zip to update libstagefright.so to the new version. Simply download the zip, copy it your sdcard or external_sd and flash it with cwm recovery.

I tested it and works fine for me, but i suggest to make a backup of your actual rom in external_sd before you flash anything. So if something go wrong you can recover your actual ROM.

http://www.freak-tab.de/leolas/libstagefright.so.zip

I hope it helps.

What is the purpose of this?I am a noob so if you can please explain..

[dark_angel]

PM

@leolas
Sent you a PM, please check
TIA
DA

[leolas]

Re: NEW - MK808 "all models" Finless 1.7 (Beta is over)

What is the purpose of this?I am a noob so if you can please explain..

If you have cwm recovery installed you can flash this zip and you must get the new lib working in your system. The updated lib seems that help using xbmc internal player in rk3066 devices and soves some issues in the original one.
I dont use xbmc at this moment so I feel it so unstable, but a lot of people is working on it and it will be a good media center.

[bruncek]

If you have cwm recovery installed you can flash this zip and you must get the new lib working in your system. The updated lib seems that help using xbmc internal player in rk3066 devices and soves some issues in the original one.
I dont use xbmc at this moment so I feel it so unstable, but a lot of people is working on it and it will be a good media center.

How do I install cwm recovery?

[dark_angel]

How do I install cwm recovery?

http://www.freaktab.com/showthread.p...rk3066-devices also check post # 82 (page 5) on the same thread

[leolas]

Re: NEW - MK808 "all models" Finless 1.7 (Beta is over)

How do I install cwm recovery?

http://www.FreakTab.com/showthread.php?t=3793

Maybe we must search a bit