Lollipop - Wasser Firmware for Beelink R89

[bloodgnome]

Does xposed work for you guys? I tried the official and the romhancer version (v74 and v75) and both are not working for me...

[bluesmanuk]

Does xposed work for you guys? I tried the official and the romhancer version (v74 and v75) and both are not working for me...

I've not seen a posted version of Xposed work yet on LP.

[pewpew22]

Had another go at it and can confirm that out-of-sync isn't a problem anymore once I adjusted via Kodi.

But I noticed the low voices amclean123 described. In fact it does not seem to be limited to voices - everything sounds muted (tested with DD and DTS 5.1). Without passthrough and with MX Player it sounds "normal".

[sintest]

Hi Wasser,

Thank you for your support on the firmware.

My device:
Beelink R89 2G/16G
PCB ver 3.0
1080P@60Hz
Gigabit Ethernet
FW 3.0.1

I have tested Youtube 1080p60hz. It is fine.
But I notice that the TV box will be freeze with red LED light after power off. (The first option in the power menu)
It cannot be powered on unless keep pressing the TV box power button for a few second to power off and then on again.

Regards,
Sintest

[pewpew22]

But I notice that the TV box will be freeze with red LED light after power off. (The first option in the power menu)
It cannot be powered on unless keep pressing the TV box power button for a few second to power off and then on again.

+1
This definitely did not happen with 3.0.0. RC3

[henschi68]

Work the RKremote App with 3.01?

[gridlock]

using the version 3.0.1 anyone with a beelink r89 will notice a minor , yet noticeable , video stutter using mxplayer .
this issue never existed in earlier rc versions (i.e 3.0.0 rc4)
(Such issue was tested in two beelink R89 boxes)

[amclean123]

using the version 3.0.1 anyone with a beelink r89 will notice a minor , yet noticeable , video stutter using mxplayer .
this issue never existed in earlier rc versions (i.e 3.0.0 rc4)
(Such issue was tested in two beelink R89 boxes)

I have a beelink R89 and I spent a lot of time with MX Player and did not see the stutter. I'll look for it again today. I am using neon.1.7.32.zip codec. The neon.1.7.32.rev1.zip codec had problems for me.

[gridlock]

I have a beelink R89 and I spent a lot of time with MX Player and did not see the stutter. I'll look for it again today. I am using neon.1.7.32.zip codec. The neon.1.7.32.rev1.zip codec had problems for me.

The testing was done using neon 1.7.32rev1 , so can you kindly check out the difference in stutter with the mentioned codec? thanks

[amclean123]

The testing was done using neon 1.7.32rev1 , so can you kindly check out the difference in stutter with the mentioned codec? thanks

I did have stutters using neon.1.7.32.rev1.zip codec. Step back to neon.1.7.32.zip codec and things will be perfect.

[gridlock]

awesome bro.....

[gridlock]

amclean123......... were you able to fix the switch off issue for beelink r89 in 3.0.1 using any power off app (e.g reboot app) ? the tronsmart r28 doesn't have such an issue.....

[amclean123]

amclean123......... were you able to fix the switch off issue for beelink r89 in 3.0.1 using any power off app (e.g reboot app) ? the tronsmart r28 doesn't have such an issue.....

You can power off the beelink r89 by using the power button in the lower left hand corner of the Android navigation bar. It's just to the left of the home and sound buttons. This only works on beelink. It doesn't work on my Tronsmart R28. Not a problem for me since I never turn mine off.

If you get sick of turning it off and on you can simply plug in a powered USB OTG cable into the beelink or tronsmart. This bypasses the need to press the power on button on the box.

[gridlock]

hopefully you can check it out....
i'm fully aware of the mentioned suggestions, but it puts it on standby mode instead of turning it off.... truly appreciate the reply bro...

[berrenger]

i have video crash. version 3.0.1