Lollipop - Wasser Firmware for Beelink R89

[Anandababu153]

On setting you go to the display option, there you will find the Cast screen, once you are on that option in the right top corner will find the enable wireless display, push that to start looking wireless devices.

I guess @soarec911 is looking for the "WifiDisplay" app that comes with the ROM (not on his OP one). I've this on my Stock ROM. And works only for a few seconds with my Mi3 phone.
can someone with the Stock ROM pull the WifiDispaly app and share it here? (not sure about the compatibility with Lollipop though)

[FreakRom]

Thanks Wasser for all updates! I have some problems with 3.0.2.
1. Sound is lagging sometimes
2. Small display artifacts, screen flickers (sometimes, often in different settings views)
I added log-file, both problems happend during when i took log. Was using Spotify

I have found some bugs with Wasser 3.0.2 on Tronsmart Orion R28 PRO:

1.- The same artifacts and screen flickering as the quoted post. I have them mostly in settings and popup windows and they appear and disappear when I move the mouse over the screen. I can send you a video if you need it. It is very anoying and sometimes the screen is so full of artifacts that you can't see anything.

2.- USB 3.0 Hard Disk showing 0 bytes of available space after some minutes of use. It work well, but after some minutes the system starts lagging and it shows that the HD has 0 capacity and 0 availbable space and all the apps that uses the HD says that the disk is full. I haven't had this problem with any other rom.

3.- Wifi speed with my Wifi N router with 20+40hz band is only 65 mbps with full signal. I haven't tried it with other roms so I don't know if it's a problem with my device and maybe it's not related with the rom.


Thank you very much for your hard work Wasser, this rom is very quick and I think it will be the best rom for our device. I hope you can fix the bugs on the next release, if I can help you to reproduce the issues or test anything just let me know.

[grummel2005]

how can i delete the memory on my orbsmart s92 before flashing?
maybe there a some parts left of old firmwares somehow - so i had problems with wasser 3.0.2
wasser could you maybe help me?
thx a lot!

[bluesmanuk]

how can i delete the memory on my orbsmart s92 before flashing?
maybe there a some parts left of old firmwares somehow - so i had problems with wasser 3.0.2
wasser could you maybe help me?
thx a lot!

Use the option in the Android tool to erase the flash first and then flash the ROM, which will also result in the storage space being formatted before being applied.

[gridlock]

sir wasser , hopefully the beelink R89 video playback micro stutter will also be fixed...
the stutter is only in versions 3.0.1 and 3.0.2 using any version of mx player and no matter the codec used)....
thanks for the extreme effort...

[kysermens]

Think you for this release.
I have a TRONSMART r28 android TV BOX, I can install this firmware?

[amclean123]

Think you for this release.
I have a TRONSMART r28 android TV BOX, I can install this firmware?

yes. I have

[Jezza89]

Just installed 3.0.2 on my Tronsmart Orion r28 and I can't believe how much more responsive it is compared to the stock firmware! For the most part it works perfectly and I'm thankful for the work you've put into this wasser, there's just a few hiccups I've noticed:

-There appears to be some glitchy artifacts that flash over the screen when ever something overlays on the desktop (notification bar, mouse cursor)
-Android doesn't appear to be putting out full RGB, the contrast appears to be washed out and there doesn't seem to be an option to alter it.
-The IR stock remote doesn't work (knew about this issue when skimming through the comments.

The full RGB one is what I'm more concerned about as the other two are not causing much hassle, if anyone is able to help me with how to resolve this issue in particular I would me most thankful!

[soarec911]

I guess @soarec911 is looking for the "WifiDisplay" app that comes with the ROM (not on his OP one). I've this on my Stock ROM. And works only for a few seconds with my Mi3 phone.
can someone with the Stock ROM pull the WifiDispaly app and share it here? (not sure about the compatibility with Lollipop though)

Yes thats i am looking for the ,,WifiDisplay ,,app or some app just like it,please anyone can port it from old kitkat rom to thi one,???

[grummel2005]

Use the option in the Android tool to erase the flash first and then flash the ROM, which will also result in the storage space being formatted before being applied.

which "android tool" do you mean and where i get it?

i used the RKBatchTool which is included in orbsmart update

[amclean123]

which "android tool" do you mean and where i get it?

i used the RKBatchTool which is included in orbsmart update

http://freaktab.com/forum/tv-player-support/rk3288-devices/16631-how-to-flash-stock-firmware-for-rk3288-tv-box-tablet-pc-newest-flash-tools-download-available

http://www.mediafire.com/download/j3rjj34o9wmcyy2/AndroidTool_Release_v2.3.rar

[grummel2005]

http://freaktab.com/forum/tv-player-...load-available

http://www.mediafire.com/download/j3...lease_v2.3.rar

thx i will try this one!


1st edit:
cannot use the file - rar file is passwordprotected!

2nd edit:
password is geekbuying.com

3rd edit:
to clear the memory:
do i have to go to "Upgrade Firmware" and then click "erase flash"???
or anything else???

[gefattern]

Hi,
if you use Batchtool 1.7 u must press restore.

[Snoopy12345]

Hi,
if you use Batchtool 1.7 u must press restore.

May i use batchtool 1.7 after erasing flash with androidtool? Or do i have to stay in android tool???

[bluesmanuk]

which "android tool" do you mean and where i get it?

i used the RKBatchTool which is included in orbsmart update

One of these.

https://www.dropbox.com/s/esbr54rh9h...v2.33.zip?dl=0

https://www.dropbox.com/s/dasx5pjl8ympd8e/AndroidTool_Release_v2.35.zip?dl=0