[ROM] XannyTech Custom Mod Rom + TWRP Recovey built-in - for MINIM8SII and other devices see first post.

[feeling6]

yes but another version will come out soon just finishing tests, and hoping for gearbest providing us the new v107 fw...

Hope to add MBoxLauncher, because I very love the desktop

[Idnom]

If the Rom/Mod after your testing has interest and it's ok, i would like to concentrate myself in a Android TV Rom.

If you're scared to lose updates, don't worry, if a update will come out i'll upload a new upgraded mod.

WARNING:
I'm not responsible and nor the forum that hosts my ROM is, of any damage or malfunction caused on your device, during the flash or the use of my ROM.
You'll take the responsibility of what you do.

To burn my Rom you need Amlogic_USB_burning_tool_2.0.8 and a male to male USB cable, 1 male to your pc, the other on the usb port near the HDMI.
you can follow this guide: http://androidpcreview.com/how-to-use-the-amlogic-usb-burning-tool-to-manually-update-firmware/3749/

DOWNLOAD LINK:
MINIM8SII_XTMOD_P .IMG file

MINIM8SII XTMOD P +TWRP RECOVERY .IMG file

ZIP Version (unzip the content in a empty sd card insert and reboot in recovery with toothpick metod to install)
MINIM8SII XTMOD P+TWRP UPDATE ZIP

Enjoy!

is this for PC using male to male USB? I tried both and can't proceed always got this error.

[totor54]

Try with the USB Burning Tool tried with the 2.08 and not the 2.06
Version 2.08 can be found on the forum

Amlogic_USB_burning_tool_2.0.8 and a male to male USB cable

[vldim]

Amlogic_USB_burning_tool_2.0.8

I apologize for the answer but vldim can help you for the version

sadness, but I do not have a version of 107 or 109 mini m8s II, only Vontar or X9.

[Xannytech]

is this for PC using male to male USB? I tried both and can't proceed always got this error.

You can flash with pc or with zip method, just choose the right file.

[mallox]

I everyone. So today I try to plug my Gamepad controller via the usb dongle as bluetooth doesn't work with my Nexbox A5.
But by doing that the keyboard of my MX3 air-mouse doesn't work anymore, even after unplug-in the gamepad dongle.

I try a bunch of different settings to try to make it work. Best I could come with is by pressing "alt" I get letter in minuscule and by pressing "CAPS" each key give me a number... but no Caps or specials characters.

I don't konw if any of you know why it's doing that and how to fix it? Or if someone could give me the default settings with MX3 remote.

Thanks

[Idnom]

You can flash with pc or with zip method, just choose the right file.

Mine is TX 5 Pro, what is the right file for this..Sorry I'm just new in here. Thank you.

[DONDIDIT]

ON THE NEXBOX A95X im having problems when i switch the tv to a different input.. and switch it back to the a95x i get a blank screen .. and it wont wake up.. any suggestions? i replaced the remoteconfig file with the original .. everything works while the box is on .. but it wont power the box on or wake it up.. but it will turn it off

[ddogishere]

ON THE NEXBOX A95X im having problems when i switch the tv to a different input.. and switch it back to the a95x i get a blank screen .. and it wont wake up.. any suggestions? i replaced the remoteconfig file with the original .. everything works while the box is on .. but it wont power the box on or wake it up.. but it will turn it off

Same here, it's the configuration of using another fw, remote will work but not all properly.

[Xannytech]

Mine is TX 5 Pro, what is the right file for this..Sorry I'm just new in here. Thank you.

it depends if you want to flash with usb male to male or with sdcard it's your choice, but if you cannot chose from a method or another i advice you to not do anything until you understand better about these procedures

[Idnom]

it depends if you want to flash with usb male to male or with sdcard it's your choice, but if you cannot chose from a method or another i advice you to not do anything until you understand better about these procedures

yes I understand the procedures, but it has an error on my unit so I can't continue the procedures. I'm tired of my stock rom and would like to try yours, because it always lags even the new official firmware version for my TX5 Pro.

[wolfynwo]

That's why i prefer the zip method,no headache.

[Xannytech]

yes I understand the procedures, but it has an error on my unit so I can't continue the procedures. I'm tired of my stock rom and would like to try yours, because it always lags even the new official firmware version for my TX5 Pro.

Amlogic_USB_burning_tool_2.0.8 and use MINIM8SII XTMOD P +TWRP RECOVERY .IMG file

[vldim]

yes I understand the procedures, but it has an error on my unit so I can't continue the procedures.

No you not understand
use Amlogic_USB_burning_tool_2.0.8

[Xannytech]

That's why i prefer the zip method,no headache.

i never had problem and it' safer and faster, but i understand you... ah wolfynwo probably i need you to test the zip file of the new version based on official V1.09