[ROM] Beelink GT1 / Alfawise S92 TVStock Nexus ROM (Android TV 6.0)

[Guest]

I have one issue, I can't connect the google Android TV remote app, I can see my GT1 listed, but selecting it fails to connect with out any error or explanation.

I just retested the Android TV Remote app with a clean install of the latest TVStock build, and it worked fine. Did you not even get a pairing prompt? And did you confirm that you're running the latest version of the app on your phone or tablet?

[lioram]

Hi all, does somebody try to connect ps3 controller ?
I try to attach but it's not working
Thx in advance

[Guest]

Was just wondering what problems you where having with the leanback keyboard ? I was expecting it not to work

Our problem was that Open GApps would remove the AOSP keyboard when installing the Google Keyboard or Leanback Keyboard. If removed, the Droidlogic control would fail to bring up any keyboard when you navigated into an edit box. To be honest, I haven't tested it lately, but it sounds like we could add the Leadback keyboard safely. I'd just need to ensure we didn't get into that scenario before where no text input was possible with the IR remote.

Also, I remember that the Leadback keyboard wouldn't work right with Terminal Emulator for some reason.

[mikele]

Do you know if this rom can fit on TX8 android box (s912 / 9377Wifi chipset) ?

[Guest]

Do you know if this rom can fit on TX8 android box (s912 / 9377Wifi chipset) ?

I haven't tested the ROM on that box, but the TX8 is also based on the q201 reference board and uses the same wireless chipset, so it should work. If your remote doesn't work, you may need to swap out the original OEM remote.conf, though. That will work for everything except cold power-up, since that IR code is hardcoded into the bootloader.

[Tweeto]

I just retested the Android TV Remote app with a clean install of the latest TVStock build, and it worked fine. Did you not even get a paring prompt? And did you confirm that you're running the latest version of the app on your phone or tablet?

I can confirm it is a problem with the latest official LinageOS, me and my wife have the same phone and I just installed the remote app on her stock OnePlus OS and it worked.

[mikele]

I haven't tested the ROM on that box, but the TX8 is also based on the q201 reference board and uses the same wireless chipset, so it should work. If your remote doesn't work, you may need to swap out the original OEM remote.conf, though. That will work for everything except cold power-up, since that IR code is hardcoded into the bootloader.

I will try this rom if I do not find anything for this device. Thank you for your answer.

[tillaz87]

Our problem was that Open GApps would remove the AOSP keyboard when installing the Google Keyboard or Leanback Keyboard. If removed, the Droidlogic control would fail to bring up any keyboard when you navigated into an edit box. To be honest, I haven't tested it lately, but it sounds like we could add the Leadback keyboard safely. I'd just need to ensure we didn't get into that scenario before where no text input was possible with the IR remote.

Also, I remember that the Leadback keyboard wouldn't work right with Terminal Emulator for some reason.

cool, all seems to be good so far also tried it with Bluetooth version of xbox one controller and works fine system.zip

only problem i'm having is with the google boot logo its always screwed up even when saved as R5 G6 B5 ?

Edit: fixed it, needs to be saved as 24bit R8 G8 B8
Here it is if interested exact same as one found on all nexus devices including nexus player bootup.zip

[killer0692]

Hello, very good rom.
I have one bug. When i play asphalte 8 with xbox 360 gamepad. It turn left alone.... and always. And the ps3 gamepad work or not?
Thanks

[Matt_E]

I don't have the answer to why this is but I can tell you my experience and how I worked around the problem. I tried sideloading the APK but on launch I got a message stating something like there was no SU binary and it can't be installed. I then tried the latest release of the TWRP flashable version but I got errors during flash about patching the bootloader if I'm remembering correctly. Then I went back to the v2.46 flashable version which is before all this systemless root stuff became a thing, which I believe was related to the issues I had flashing the current release. That worked. Then I updated to the latest release with the sideloaded APK.You can get the v2.46 flashable zip from the link.

the same thing happened to me when installing the latest zip also lost the root that was already installed. By following your instructions i was able to update to the latest. Thank you joelkolb. I didn't get a chance to try until today so sorry it took so long to report my progress.

[ozzman666]

The post at http://freaktab.com/forum/tv-player-...imate-20170224 contains a link to the latest Beelink GT1 Ultimate factory image (GT1_311M0).

After setting up and trying out your brilliant Android TV ROM on a relative's Beelink GT1 for a few days, I encountered something unusual when I took the device back to his house. Shortly after it connected to his WiFi network, I noticed that the connection would drop and reconnect frequently (as in every minute). This was a surprise to me because I experienced no such issues at my house. I had him power cycle his modem / router (Bell Home Hub 2000 AKA Sagemcom F@st 5250) and I restarted the Beelink GT1 multiple times but that didn't solve the problem. I then accessed his modem / router's control panel and noticed that it used a shared SSID for both the 2.4 GHz and 5 GHz wireless bands. After I disabled that option and had the device connect to one of two separate SSIDs, the connection became stable. I think this is worth mentioning here because back when he had the Beelink (GT1_106M0) firmware installed, he did not experience that issue even with the shared SSID for both wireless bands..

Just ran into this today after flashing on my T95U pro. Couldn't figure out why I kept getting connection drops. Separating the 2.4 and 5ghz bands into 2 different SSID solved the issue Thanks!

Also thank you Magendanz for a great rom everything is running great!

[killer0692]

Hello, very good rom.
I have one bug. When i play asphalte 8 with xbox 360 gamepad. It turn left alone.... and always. And the ps3 gamepad work or not?
Thanks

With sixaxis controller, it work for 2 sixaxis gamepads on riptide 2! Very good

[Matt_E]

This works great on my t95 U Pro even using retroarch so kudos Megendanz much appreciated, just thought I'd give a little back, for anyone who is using this rom for playing games and would like to use a wired ps3 gamepad or one of the DragonRise Gamepad ( usually chinese gamepads that are made to look like n64 or snes controllers).

Simply unzip these two .ko files (hid-dr.ko and hid-sony.ko) from the zip attatched to the bottom of this post to your box and open terminal, cd to the folder you copied them to and type

insmod hid-sony.ko

for the ps controller and

insmod hid-dr.ko

for the dragonrise controller. Took me a while to find these ones that worked with the previous rom I was using so was glad to find they still worked with this one.

[ATTACH]n643537[/ATTACH]

If you follow these instructions a couple of pages back you can use the PS3 controller with a cable too

[killer0692]

Thank you

[lefteris82]

Excellent rom!!!! I Installed it on my alfawise S92 and working perfectly! Keep up the great work i'ts awesome. I'd like to ask you..

• Added Android TV Remote Control Service, allowing use of any Android phone or tablet as a full-featured voice remote control

i connected my android phone (oneplus 3T) with bluetooth. but then how i can i use it as a remote control????

thank you very much