UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

[jwebdd]

Which Touch Screen Monitors?

Is anyone using this with a touch screen monitor? If so, which monitor are you having the most success with?

Thanks!

Joe C.

[BP-isMe]

Overclock RAM to 800

Hi All,

I was reading in another FT forum that the DDR RAM runs at 400 mhz. They suggested to overclock it to 800. Supposedly the only down side is battery drain. I'm not usually one to overclock devices but I was wondering if anyone has tried this on our device. I would assume one would need to use one of the OC Kernels in the 1.6b ROM.

Thanks for your help...Brad

[TexinTX]

Is anyone using this with a touch screen monitor? If so, which monitor are you having the most success with?

Thanks!

Joe C.

I'm trying to get it to work for a PQ Labs G3 touch screen 46" overlay with no luck so far.

I tired insmod the module that Finless added but my CX-919 just reboots. I tried cross-compiling the drivers provided by PQ Labs but got the same result (with this driver it also causes the "stock" firmware to reboot). There seems to be some other libraries (.so) I need to compile (libtinyxml and libusb) which I can't for the life of me get to compile correctly...

I have a Acer touchscreen at home as well and I will/should test it out and will post back on result.

I really which I knew how to cross compile properly, I'm just tinkering. Also don't know if the Android toolchain I have is correct for the Finless ROM. Any pointers would help...

- Paul T.

[JugsteR]

Re: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

Hi All,

I was reading in another FT forum that the DDR RAM runs at 400 mhz. They suggested to overclock it to 800. Supposedly the only down side is battery drain. I'm not usually one to overclock devices but I was wondering if anyone has tried this on our device. I would assume one would need to use one of the OC Kernels in the 1.6b ROM.

Thanks for your help...Brad

Battery drain is not an issue. There is no battery. Make sure your PSU can deliver though.

Heat is an issue. Make sure you have it properly ventilated.

My memory is clocked at 667 which works fine for me and on most devices. Your mileage will vary.

Signature? Signature!

[JugsteR]

Re: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

I'm trying to get it to work for a PQ Labs G3 touch screen 46" overlay with no luck so far.

I tired insmod the module that Finless added but my CX-919 just reboots. I tried cross-compiling the drivers provided by PQ Labs but got the same result (with this driver it also causes the "stock" firmware to reboot). There seems to be some other libraries (.so) I need to compile (libtinyxml and libusb) which I can't for the life of me get to compile correctly...

I have a Acer touchscreen at home as well and I will/should test it out and will post back on result.

I really which I knew how to cross compile properly, I'm just tinkering. Also don't know if the Android toolchain I have is correct for the Finless ROM. Any pointers would help...

- Paul T.

This is the toolchain I use: http://releases.linaro.org/13.12/com...2_linux.tar.xz

Actually I used the version before this 13.11, but this one should work as well.

Search this forum for Marvin, it is a tool that will help you compile kernels.

Signature? Signature!

[BP-isMe]

Thank You

Battery drain is not an issue. There is no battery. Make sure your PSU can deliver though.

Heat is an issue. Make sure you have it properly ventilated.

My memory is clocked at 667 which works fine for me and on most devices. Your mileage will vary.

Signature? Signature!

I'll look into it some more and maybe give it a try.

Brad

[kc9]

Is there possibility to use microsoft lifecam hd-3000 via skype on cx-919?

[BP-isMe]

Remove Search Bar

Hi All,

Has anyone been able to remove the search bar from the top of the home page? I am hoping to not need to install a new launcher as the stock one works well except for the search bar. Installing a new launcher is a bummer because every time it gets an update, you need to set it as default launcher again. I know that I am being picky but I'm hoping that someone who understands how to do this mod has already done it. I've seen posts about editing xml files in the framework directory but I've also seen caution statements that get scary.

Thank You...Brad

[BP-isMe]

Logitech C270

Is there possibility to use microsoft lifecam hd-3000 via skype on cx-919?

I know that this does not directly answer your question but I am using a Logitech C270 and it works pretty well. I needed to power cycle after plugging it in to get it to work. If you don't already own the lifecam, this may be an option for you. If you do own the lifecam, you could always just plug it in and power cycle to try it out.

Brad

[Finless]

To remove the search bar you need to know how to take apart an APK and recompile it. You remove it by editing .smali code in the launcher.apk

Bob

[BP-isMe]

Beyond My Knowledge

Hi Bob,

This is beyond my knowledge. Maybe someone who feels the need and knows how will give it a try and be willing to share.

BTW: Thank you so much for your hard work. It is very much appreciated! I've been watching your KitKat ROM thread as well. Looks like your a busy guy.

I wish I had more time to dedicate to this hobby. Learning more about this stuff would be fun and contributing more would be rewarding.

Brad

[FadeFx]

AW: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

Hi Bob,

This is beyond my knowledge. Maybe someone who feels the need and knows how will give it a try and be willing to share.

BTW: Thank you so much for your hard work. It is very much appreciated! I've been watching your KitKat ROM thread as well. Looks like your a busy guy.

I wish I had more time to dedicate to this hobby. Learning more about this stuff would be fun and contributing more would be rewarding.

Brad

Why not just install apex, nova or adw launcher

_________________________
tapatalked from GalaxyS3

[BP-isMe]

Other Launcher

I may end up installing another launcher. I would rather not for the reasons I mentioned before.

Thanks...Brad

[JugsteR]

Re: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

I may end up installing another launcher. I would rather not for the reasons I mentioned before.

Thanks...Brad

Luckily, those are crap reasons

Signature? Signature!

[BP-isMe]

Yup

I know...I'm just being picky.