ATV9-MOD-(P212)AMPERE-V3

[bullghost]

bullghost
Your device is currently not supported, read the first post (SpecTek MLC Nand), I could build an extra build for this type of memory, but I won't start without a test device because the bootloader has to be reconfigured

Hi bumerc , you can use my box to do the test

[freakbox]

My Box too

[herbert_15]

New updates are now available in the first post..!

Hi, i can flash it on my tanix tx3 mini 2018 ok?
and i need replace the remote.conf?

[bumerc]

Hi, i can flash it on my tanix tx3 mini 2018 ok?
and i need replace the remote.conf?

hi, no, only s905x devices

[RiCkLaR_atvX]

For those that know how, setting the CPU minimum frequency at 500 or 600 mhz seems to really improve this firmware which is already very stellar and I don't feel a need to change much of anything.

[Leiden]

hi
I installed ATV9-img- debug-ampere AP6330-v3 on my device T6 s905x and it was successfully completed, but the problem when operating the device works well but asks to choose the language and choose the language but when I press the OK button it does not work until I continue to the next steps, unfortunately I could not Do this because the remote does not work, and also I cannot replace the remote file because I cannot log in. Please help.

[Guest]

...remote does not work, and also I cannot replace the remote file because I cannot log in...]

Instead, use a computer mouse to complete the installation ...

[Leiden]

Instead, use a computer mouse to complete the installation ...

also don't werk ,nothing works through USB.

[bumerc]

hi
I installed ATV9-img- debug-ampere AP6330-v3 on my device T6 s905x and it was successfully completed, but the problem when operating the device works well but asks to choose the language and choose the language but when I press the OK button it does not work until I continue to the next steps, unfortunately I could not Do this because the remote does not work, and also I cannot replace the remote file because I cannot log in. Please help.

use the remote control of your TV. Read the previous pages, it is described several times how you can replace the remote.conf. Regarding USB port - only one of the two works at the moment

[Leiden]

use the remote control of your TV. Read the previous pages, it is described several times how you can replace the remote.conf. Regarding USB port - only one of the two works at the moment

Unfortunately I read all the previous pages and did not find any solution to this problem and also tried to login ssh and I could not login as root, generally I have a request if it is possible to modify the remote file in the Rom so that we can install the Rom without problems.

Thanks

[hannah]

For those that know how, setting the CPU minimum frequency at 500 or 600 mhz seems to really improve this firmware which is already very stellar and I don't feel a need to change much of anything.

Please suggest the steps to perform above.

Thank you
Hannah

[bumerc]

Unfortunately I read all the previous pages and did not find any solution to this problem and also tried to login ssh and I could not login as root, generally I have a request if it is possible to modify the remote file in the Rom so that we can install the Rom without problems.

Thanks

1. A passphrase is set for ssh login, which you will find in the first post.
2. Attach your remote.conf here

[Leiden]

:/vendor/etc/dropbear # dmesg | grep chip
[ 0.226749] Meson chip version = RevB (21:B - 82:0)
[ 1.153218] hdmitx: system: hdmitx_device.chip_type : 3
[ 1.350089] chip type:0x21
[ 7.828709] The chip is not support hevc encoder
:/vendor/etc/dropbear #
127|:/vendor/etc/dropbear # mount -o rw,remount /vendor
:/vendor/etc/dropbear # cp /sdcard/remote.conf /vendor/etc/remote.cfg
cp: bad '/sdcard/remote.conf': No such file or directory
1|:/vendor/etc/dropbear #
emtrack_default:s0 tcontext=u:r:dropbear:s0 tclass=dir permissive=1
[ 1290.332520] meson-remote c8100580.rc: scancode 80 undefined
[ 1290.332637] meson-remote c8100580.rc: no valid key to handle
[ 1290.744918] meson-remote c8100580.rc: scancode 81 undefined
[ 1290.745032] meson-remote c8100580.rc: no valid key to handle
[ 1431.566207] type=1400 audit(1589554607.436:240): avc: denied { search } for p id=3106 comm="[email protected]" name="3117" dev="proc" ino=614 scontext=u:r:hal_m
how to replace remote file or conf

[bumerc]

Leiden
wrong.
1. Find the correct mount point of your SDcard with the command "mount".

mount

2. Now copy your remote.conf:

cp /your_sdcard/mount/point/remote.conf /vendor/etc/remote1.tab

[Leiden]

Leiden
wrong.
1. Find the correct mount point of your SDcard with the command "mount".

mount

2. Now copy your remote.conf:

cp /your_sdcard/mount/point/remote.conf /vendor/etc/remote1.tab

:/vendor/etc/dropbear # mount
/dev/root on / type ext4 (ro,seclabel,relatime,block_validity,delalloc,barr ier,user_xattr,acl)
devtmpfs on /dev type devtmpfs (rw,seclabel,relatime,size=1027176k,nr_inodes=1859 08,mode=755)
tmpfs on /dev type tmpfs (rw,seclabel,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,seclabel,relatime,mode=600,ptmxmode=000)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,seclabel,relatime)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,relatime)
tmpfs on /mnt type tmpfs (rw,seclabel,nosuid,nodev,noexec,relatime,mode=755 ,gid=1000)
/dev/block/odm on /odm type ext4 (ro,seclabel,relatime,block_validity,delalloc,nojo urnal_checksum,barrier,user_xattr,acl,inode_readah ead_blks=8)
/dev/block/product on /product type ext4 (ro,seclabel,relatime,block_validity,delalloc,nojo urnal_checksum,barrier,user_xattr,acl,inode_readah ead_blks=8)
/dev/block/vendor on /vendor type ext4 (ro,seclabel,relatime,block_validity,delalloc,barr ier,user_xattr,acl,inode_readahead_blks=8)
none on /acct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct)
/sys/kernel/debug on /sys/kernel/debug type debugfs (rw,seclabel,relatime,mode=755)
configfs on /sys/kernel/config type configfs (rw,relatime)
none on /dev/stune type cgroup (rw,nosuid,nodev,noexec,relatime,schedtune)
none on /config type configfs (rw,nosuid,nodev,noexec,relatime)
none on /dev/cpuctl type cgroup (rw,nosuid,nodev,noexec,relatime,cpu)
none on /dev/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,noprefix,r elease_agent=/sbin/cpuset_release_agent)
cg2_bpf on /dev/cg2_bpf type cgroup2 (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime)
pstore on /sys/fs/pstore type pstore (rw,seclabel,nosuid,nodev,noexec,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,seclabel,relatime)
/dev/block/data on /data type ext4 (rw,seclabel,nosuid,nodev,noatime,nodelalloc,resgi d=1065,errors=panic,data=ordered)
/dev/block/cache on /cache type ext4 (rw,seclabel,nosuid,nodev,noatime,nodelalloc,error s=panic,data=ordered)
/dev/block/metadata on /metadata type ext4 (rw,seclabel,nosuid,nodev,noatime,nodelalloc,error s=panic,data=ordered)
/dev/block/param on /mnt/vendor/param type ext4 (rw,seclabel,nosuid,nodev,noatime,nodelalloc,error s=panic,data=ordered)
/dev/block/tee on /mnt/vendor/tee type ext4 (rw,seclabel,nosuid,nodev,noatime,nodelalloc,error s=panic,data=ordered)
tmpfs on /storage type tmpfs (rw,seclabel,nosuid,nodev,noexec,relatime,mode=755 ,gid=1000)
adb on /dev/usb-ffs/adb type functionfs (rw,relatime)
/data/media on /mnt/runtime/default/emulated type sdcardfs (rw,nosuid,nodev,noexec,noatime,fsuid=1023,fsgid=1 023,gid=1015,multiuser,mask=6,derive_gid,default_n ormal)
/data/media on /storage/emulated type sdcardfs (rw,nosuid,nodev,noexec,noatime,fsuid=1023,fsgid=1 023,gid=1015,multiuser,mask=6,derive_gid,default_n ormal)
/data/media on /mnt/runtime/read/emulated type sdcardfs (rw,nosuid,nodev,noexec,noatime,fsuid=1023,fsgid=1 023,gid=9997,multiuser,mask=23,derive_gid,default_ normal)
/data/media on /mnt/runtime/write/emulated type sdcardfs (rw,nosuid,nodev,noexec,noatime,fsuid=1023,fsgid=1 023,gid=9997,multiuser,mask=7,derive_gid,default_n ormal)
:/vendor/etc/dropbear # cp /your_sdcard/mount/point/remote.conf /vendor/etc/remote1.tab
cp: bad '/your_sdcard/mount/point/remote.conf': No such file or directory
f': No such file or directory