T-R42 - wasser firmware - JB Android 4.2.2

[dobosz23]

Jesurun DX05 with bluetooth - like T-R42 v1.0.

Wasser thanks for kernel`s - i don`t to use them because i want to play video in 1080p. I use 1080p boot and kernel for 1080p old T-R42 and works but player has not good enough power to play video in 1080p on XBMC that you use in this firmware. I use kernel kernel-t_r42 cpu1704_ddr720_1080p_gpu600h and now i have CPU 1600 and more unused ram - video run fine in 1080p more than 20GB, game hasn`t problem to run and i play in best resolution than 720p. Everyfing work fine and XBMC play more video files than other version.

Thanks for you hard work - best regards from Polish, dobosz23.

[bennobaer]

Hello Wasser and Thanks for good work,

can i use the oc kernel kernel-t_r42_cpu1920h_ddr720_1080p_gpu600h for the T-R42 new version ?

Thanks Bernd

[ollie26]

1080p old OC kernel

hi wasser, loving the rom. would it be possible for you to make me an OC kernel based on the Old 1080p T-R42 kernel? my playback and fps in XBMC is 35-37 and lags playback. the T-R42 Old kernel is the only one that works for me with your Rom. I would make you a small donation for your hardwork. Thanks!

my current CPU is 1.41Ghz in XBMC

[gor]

Wasser help please...

Question for Wasser ... I have a device called MK819 with BT, the chip is AP6210, but the mark of PCB HM E237212 94V0 and looks completely different from all the equipment that I have seen on the forum ... How do I put this device 1.2.4 rom, and if it's possible ... This is a picture of my unit ...

[ollie26]

Question for Wasser ... I have a device called MK819 with BT, the chip is AP6210, but the mark of PCB HM E237212 94V0 and looks completely different from all the equipment that I have seen on the forum ... How do I put this device 1.2.4 rom, and if it's possible ... This is a picture of my unit ...[ATTACH=CONFIG]4901[/ATTACH]

That board is the same as mine. Wasser 1.2.4 fw works but with only the 1080p old kernel. Fps is limited to 32-35 fos and playback is stuttering. The old 720p kernel boots up with good fps but CPU usage is really high and playback stutters again. 1080p old kernel has WiFi and BT but no Ethernet.
Maybe someone can make us a OC kernel based in the OLD T-R42 1080p kernel.

[ollie26]

OC Kernels

I have tried the OC kernels listed on page 1 but my CPU clock is locked at 1.2ghz for both minimum and Max. My CPU should be either 1704, 1800 or 1920. The only kernel that gives Me a high CPU is the cpu1704 but that's only 1.41Ghz Any ideas why?

[gor]

That board is the same as mine. Wasser 1.2.4 fw works but with only the 1080p old kernel. Fps is limited to 32-35 fos and playback is stuttering. The old 720p kernel boots up with good fps but CPU usage is really high and playback stutters again. 1080p old kernel has WiFi and BT but no Ethernet.
Maybe someone can make us a OC kernel based in the OLD T-R42 1080p kernel.

Thanks for the information ... I noticed that these PCBs began just a month ago ... that you could take advantage of the kernel of the stock rom .. if the first did Nandroid Bacup with CWR .. and extract the kernel...
I'm sorry .. if I'm talking nonsense ...

[gor]

Correction...

I have to correct myself ... the name of the unit next to Chinese characters is MK918 with BT ... I wrote wrong in the first post ...

[ollie26]

Thanks for the information ... I noticed that these PCBs began just a month ago ... that you could take advantage of the kernel of the stock rom .. if the first did Nandroid Bacup with CWR .. and extract the kernel...
I'm sorry .. if I'm talking nonsense ...

I have already flashed mine so no stock dump, sorry.

Here is our box http://www.aliexpress.com/item/with-...191028162.html

Are they any kernels/ROMs available?

[Requan]

Hi,
I would like to upload OC kernel's for my T-R42 v2 because i have a little problems with some videos.
Could You advice me which version of speed DDR's i should to use:

this:
kernel-t_r42 cpu1704_ddr720_1080p_gpu600h
or
kernel-t_r42_cpu1704_ddr800_1080p_gpu600h
?

[gor]

I have already flashed mine so no stock dump, sorry.

Here is our box http://www.aliexpress.com/item/with-...191028162.html

Are they any kernels/ROMs available?

I'll do Nandroid Bacup but first I have to root and install CWM and it was a different condition compared to the devices described in the forum I have to be careful ... Will put rom on the forum ... According to the description and name of this stock is a combination formed for this type of device, probably the T-R42 or some other older devices with the AP6210 WiFi + BT

[ollie26]

Hi,
I would like to upload OC kernel's for my T-R42 v2 because i have a little problems with some videos.
Could You advice me which version of speed DDR's i should to use:

this:
kernel-t_r42 cpu1704_ddr720_1080p_gpu600h
or
kernel-t_r42_cpu1704_ddr800_1080p_gpu600h
?

Try the ddr720 one. Also check your CPU reading as mine was 1.2ghz with all the OC kernels.
I've now flashed wassers KitKat ROM and runs well but no Ethernet only WiFi

[Requan]

Try the ddr720 one. Also check your CPU reading as mine was 1.2ghz with all the OC kernels.
I've now flashed wassers KitKat ROM and runs well but no Ethernet only WiFi

thanks, i will try. I also uploaded kitkat, You right it runs very well, but my issue was that after restart i hadn't audio. I think the problem is lost of audio output settings,but kitkat hasn't option to set up it.

[ollie26]

thanks, i will try. I also uploaded kitkat, You right it runs very well, but my issue was that after restart i hadn't audio. I think the problem is lost of audio output settings,but kitkat hasn't option to set up it.

Audio is problem for me too. Which kernel did you use? Also have you found a way to hide the taskbar?

[petesimon]

same for me with wasser 1.2.4

Wifi, BT, and LAN all not working with 1.2.4 (t-r42-new) on a box I bought two weeks ago from Amazon: www.amazon.co.uk/dp/B00E7OSRBE
In Settings the wifi and BT switches revert back to OFF after about 5 seconds, and when you try to switch on LAN Settings crashes to the home screen.
It's frustrating because the rom's great apart from that.
How do you open the box to find out what model you've got? I don't see any obvious way to get into it.

the same results for my board B351_v1.0 from Amazon www.amazon.com/dp/B00F2A2PQA I got a few days ago. there was no model number and no serial number on the device. I had to open the case. the stock rom build is "rk31sdk-eng 4.2.2 JDQ39 eng.linking.20130709.184313 test-keys". now I'm testing lewy20041 T428_HFW_1.2.1_720p. but no wifi and no bluetooth. just ethernet, luckily! some photos and the stock rom build.prop are attached. * will post a dmesg and logcat soon when I load wasswer rom again.

what is your board? and build? got a photo? have you tried different wasser kernels, 1080 or 720, or different wasser version 1.2.3 or lower?