Neomode Custom Rom MK809III Version 3.1 Android 4.4.2 *Update*

[Nijaz]

Grab D33 kernel here . http://www.freaktab.com/showthread.p...8well-most!%29

After your done flashing and setting the rom location serives up.
Go back to the flash program and unselect everything except the kernel and on the right side of that click on the tab and browse to where ever you unzipped D33 latest kernel.

Select TV stick either hd (1080p) or sd (720p).
Put the stick back into flash mode and click run on the flash program.

Thats it its now good up to 1.6ghz.

thank you
work!

[Magnus33]

Thanks for the tip Magnus33. I'll try the downclock process and post the feedback


UPDATE: It's seens that work well. I did the downclock to 1.2 ghz and played netflix 2 hours straight without reboot.

Thks

Some of the devices are a little more picky about the overclock from 1.4ghz to 1.6ghz.
Had the same problem with one of mine.

This way you can use the improved kernel/rom and still enjoy netflixs


Or you can do what Nijaz did above in the picture...lol
Enjoy

[Magnus33]

thank you
work!
[ATTACH=CONFIG]7678[/ATTACH]

I don't foresee you having cooling problems with the overclock anytime soon

Your welcome

[eve_Snuffy]

Well this looks awesome... But it isn't very small and easy too Hide anymore..
But as a geek - nice too watch

This post was created with Tapatalk. Plesse excuse any spelling errors. I'll do my very best.

[Nijaz]

I don't foresee you having cooling problems with the overclock anytime soon

Your welcome

three o'clock in the game asphalt, hot radiator

[Nijaz]

I don't foresee you having cooling problems with the overclock anytime soon

Your welcome

I want the core with a frequency of 1.9
do not tell me where to download?)

[Magnus33]

I would ask in D33 kernel thread but after 1.6 the returns vs the heat are quite small.

D33 kernels have cpu/gpu and memory overclock to some degree but the T versions of the cpu tend to be very picky about overclocks.

[yazik]

hello people.
that there is a parameter?, parameter1gb, parametr2gb, parametr4gb .... RAM?
Is it possible to flash the only parameter or it is necessary all the firmware (boot, kernel, misc ... etc)
The problem is that I mk809III 2gb / 8gb, and after flashing appears to the system as 0,98gb / 5,3gb.
or is this normal?
I apologize for Google translation

[mo123]

hello people.
that there is a parameter?, parameter1gb, parametr2gb, parametr4gb .... RAM?
Is it possible to flash the only parameter or it is necessary all the firmware (boot, kernel, misc ... etc)
The problem is that I mk809III 2gb / 8gb, and after flashing appears to the system as 0,98gb / 5,3gb.
or is this normal?
I apologize for Google translation

If you want different parameter file sizes, you have to flash the whole ROM again.
system partition is uasually 750mb-1GB The smaller size the better, and more space for other partitions
userdata partition 1GB or 2Gb This should be 2GB, since all the apps store their data and settings here, if too small you can't install more apps.
user partition is the remaining free space usually 3-4GB.
If you upload the parameter file, I can change userdata to 2GB if it is 1GB.

[ikerg]

Re: Neomode Custom Rom MK809III Version 3.1 Android 4.4.2 *Update*

Hi everyone...

I have a MK809III with RK3188T and RTL8723BS, will this ROM work for me... thanks...

Did you find the ROM?
As I understand you should use an official based kitkat ROM (not beta based) and a kernel from d33

Is the neomode 3.1 based on official kitkat ROM?
If not...Any link to official based kitkat ROM?

Many thanks in advance

Enviado desde mi GT-I9300 mediante Tapatalk

[neomode]

Yes my ROM is a Official KitKat Rom.

Gesendet von meinem HUAWEI P7-L10

[pelias]

hello, I bought a 809III and installed the new version rom and not start after installed the old version rom and it works but with much lag and the usb does not work.
I tested the original rom and everything worked.
I appreciate any help
best regards

[ikerg]

Re: Neomode Custom Rom MK809III Version 3.1 Android 4.4.2 *Update*

hello, I bought a 809III and installed the new version rom and not start after installed the old version rom and it works but with much lag and the usb does not work.
I tested the original rom and everything worked.
I appreciate any help
best regards

First of all you need to identify which mk809iii you have....open it and look to the WiFi /BT chipset. Which chipset do you have?
Once identified you can play with other ROMs with the proper kernel
The original ROM (stock) is kitkat or jelly bean?
Does wifi and/or bluetooth works on original stock rom?
Does wifi and/or bluetooth works on neomode custom rom?
How about the performance of WiFi?


Enviado desde mi GT-I9300 mediante Tapatalk

[pelias]

First of all you need to identify which mk809iii you have....open it and look to the WiFi /BT chipset. Which chipset do you have?
Once identified you can play with other ROMs with the proper kernel
The original ROM (stock) is kitkat or jelly bean?
Does wifi and/or bluetooth works on original stock rom?
Does wifi and/or bluetooth works on neomode custom rom?
How about the performance of WiFi?


Enviado desde mi GT-I9300 mediante Tapatalk

thanks for quick reply,
wifi -AP6210
chip- rockchip rk3188-T
original rom is jellybean
wifi works on stock rom
in NeoMode rom unbootable
sorry for the bad english
best regards

[pehe]

Change dpi

Hi,

I'm trying to use the stick with an Appradio3. The problem is that the symbols are too small. Trying to change the dpi in build.prop will cause errors.

Is there any other possibility?

About 220 dpi would be a good solution.

Thank you!