Announcement

**IMFan** · 22 February 2015, 09:37

Originally posted by codesnake View Post

This issue is hard to fix for me, because I cannot reproduce it. Works just fine on my LG TV.

It could be a Panasonic specific issue.
I have read about this exact issue. I believe it had something to do with the way the Panasonic handles the hdmi handshake and i know of one case where Panasonic had offered to replace the TV...

**IMFan** · 22 February 2015, 09:41

Originally posted by trapdoor_howie View Post

Trying to update from 4.21 to the 5.03
tried putting the tar in the update folder and toothpick method
both time update appears to work,
but on first normal boot stops on the openelec logo centre screen
and a text message top left

starting debugging shell... type exit to quit#
cant access tty; job controlled turned off

any hints
thanks in advance

Yes, this issue is widely known.
Look two posts above your original post and try that method.

**vermillion** · 22 February 2015, 16:49

If possible can someone post the contents of the asound.conf located in /ect folder for the m8 build.
Thanks.

**brummy13** · 22 February 2015, 17:51

Originally posted by codesnake View Post

System->File Manager

Not giving me option to save?

**IMFan** · 22 February 2015, 18:23

Originally posted by brummy13 View Post

Not giving me option to save?

It works a bit different:
On one side, browse to the files or dirs you want to copy.
The other side will be your destination.
Press menu, then copy or move.

**freddy_krueger** · 22 February 2015, 19:19

vigica c60s

Hi all
i have this box http://www.aliexpress.com/item/2015-...009187420.html

I would like to install openelec on it , can i ?
will i be able to use dvb-s2 ?
does openelec replace android ?
is it risky ?
thank you for your help
regards

**taki** · 22 February 2015, 20:57

Originally posted by taki View Post

do anybody use dvb tuner with tvheadend on openelec. can you watch any problem h264 HD channels with openelec. I have problem h264 mpeg4 hd channels on openelec.
I have any problem 0-6 mb/s hd amc-h264 channels but 6-20mb/s channels stutter every 20 second. that may be based amcodech or usb tuner connect host speed or cpu?

I found Why HD h264 channles stutter . that is inside (ERROR check in pts error!)

Code:

DEBUG: PVRManager - bool  PVR::CPVRManager::PerformChannelSwitch(PVR::CPVRChannel&, bool) -  switching to channel 'TRT HABER HD'
02:36:08 T:1936608240    INFO: AddOnLog: Tvheadend HTSP Client: SwitchChannel - changing to channel 'TRT HABER HD'
02:36:08 T:1936608240    INFO: AddOnLog: Tvheadend HTSP Client: SendUnsubscribe - unsubscribe from subscription 2
02:36:08 T:1928223608   DEBUG: CAMLCodec::SetSpeed, speed(0)
02:36:08 T:1866097440    INFO: AddOnLog: Tvheadend HTSP Client:  ParseSubscriptionStop - subscription ended on adapter Montage Technology  DS3000 : DVB-S #0
02:36:08 T:1936608240    INFO: AddOnLog: Tvheadend HTSP Client: SendSubscribe - subscribe to channel '832160303', subscription 3
02:36:08 T:1936608240   DEBUG: AddOnLog: Tvheadend HTSP Client: SendSubscribe - new subscription for channel 14912203 (3)
02:36:08 T:1936608240   DEBUG: Loading settings for pvr://channels/tv/Tüm Kanallar/303.pvr
02:36:08 T:1936608240   DEBUG: CPVRChannelGroup - bool  PVR::CPVRChannelGroup::Persist() - persisting channel group 'HDTV' with  13 channels
02:36:08 T:1782591720   DEBUG: ------ Window Deinit (VideoOSD.xml) ------
02:36:08 T:1936608240  NOTICE: PVRManager - bool  PVR::CPVRManager::PerformChannelSwitch(PVR::CPVRChannel&, bool) -  switched to channel 'TRT HABER HD'
02:36:08 T:1861550536   DEBUG: CAnnouncementManager - Announcement: OnStop from xbmc
02:36:08 T:1861550536   DEBUG: GOT ANNOUNCEMENT, type: 1, from xbmc, message OnStop
02:36:08 T:1861550536   DEBUG: CAnnouncementManager - Announcement: OnPlay from xbmc
02:36:08 T:1861550536   DEBUG: GOT ANNOUNCEMENT, type: 1, from xbmc, message OnPlay
02:36:08 T:1936608240  NOTICE: Creating Demuxer
02:36:08 T:1936608240   DEBUG: CDVDPlayer::SetCaching - caching state 2
02:36:08 T:1928223608   DEBUG: CAMLCodec::SetSpeed, speed(0)
02:36:08 T:1782591720   DEBUG: ------ Window Init (DialogSeekBar.xml) ------
02:36:08 T:1782591720   DEBUG: Window DialogSeekBar.xml was already loaded
02:36:08 T:1782591720   DEBUG: Alloc resources: 0.21m
02:36:10 T:1866097440   DEBUG: AddOnLog: Tvheadend HTSP Client: ProcessMessage - Unmapped action recieved 'subscriptionGrace'
02:36:11 T:1866097440   DEBUG: AddOnLog: Tvheadend HTSP Client: ParseSubscriptionStart - id: 1, type: H264, codec: 28
02:36:11 T:1866097440   DEBUG: AddOnLog: Tvheadend HTSP Client: ParseSubscriptionStart - id: 2, type: MPEG2AUDIO, codec: 86016
02:36:11 T:1866097440   DEBUG: AddOnLog: Tvheadend HTSP Client: ParseSubscriptionStart - id: 3, type: TELETEXT, codec: 94215
02:36:11 T:1866097440    INFO: AddOnLog: Tvheadend HTSP Client:  ParseSubscriptionStart - subscription started on adapter Montage  Technology DS3000 : DVB-S #0, mux 11054V, network turksat, provider TRT,  service TRT HABER HD
02:36:11 T:1936608240   DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 0:1 with codec_id 28
02:36:11 T:1936608240   DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 1:2 with codec_id 86016
02:36:11 T:1936608240   DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 2:3 with codec_id 94215
02:36:11 T:1936608240  NOTICE: Opening stream: 0 source: 256
02:36:11 T:1936608240  NOTICE: Creating video codec with codec id: 28
02:36:11 T:1936608240   DEBUG: CDVDFactoryCodec: compiled in hardware  support: AMCodec:yes MediaCodec:yes OpenMax:no libstagefright:yes  RKlibstagefright:yes VDPAU:no VAAPI:no iMXVPU:no
02:36:11 T:1936608240   DEBUG: FactoryCodec - Video: amcodec - Opening
02:36:11 T:1936608240    INFO: DVDVideoCodecAmlogic: Opened Amlogic Codec
02:36:11 T:1936608240   DEBUG: FactoryCodec - Video: am-h264 - Opened
02:36:11 T:1928223608   DEBUG: CAMLCodec::CloseDecoder
02:36:11 T:1803998552   DEBUG: CAMLCodec::Process Stopped
02:36:11 T:1803998552   DEBUG: Thread CAMLCodec 1803998552 terminating
02:36:11 T:1936608240  NOTICE: Opening stream: 1 source: 256
02:36:11 T:1936608240  NOTICE: Finding audio codec for: 86016
02:36:11 T:1936608240   DEBUG: FactoryCodec - Audio: passthrough - Opening
02:36:11 T:1936608240   DEBUG: FactoryCodec - Audio: passthrough - Failed
02:36:11 T:1936608240   DEBUG: FactoryCodec - Audio: FFmpeg - Opening
02:36:11 T:1936608240   DEBUG: FactoryCodec - Audio: FFmpeg - Opened
02:36:11 T:1936608240  NOTICE: Opening stream: 2 source: 256
02:36:11 T:1936608240   DEBUG: void CDVDDemuxPVRClient::ParsePacket(DemuxPacket*) - {1} iSampleRate changed from 3 to 48000
02:36:11 T:1936608240  NOTICE: Opening stream: 1 source: 256
02:36:11 T:1936608240  NOTICE: Finding audio codec for: 86016
02:36:11 T:1936608240   DEBUG: FactoryCodec - Audio: passthrough - Opening
02:36:11 T:1936608240   DEBUG: FactoryCodec - Audio: passthrough - Failed
02:36:11 T:1936608240   DEBUG: FactoryCodec - Audio: FFmpeg - Opening
02:36:11 T:1936608240   DEBUG: FactoryCodec - Audio: FFmpeg - Opened
02:36:11 T:1927676016   DEBUG: CDVDPlayerAudio - CDVDMsg::GENERAL_RESYNC(-4960000.000000, 1)
02:36:11 T:1927676016  NOTICE: Creating audio stream (codec id: 86016, channels: 2, sample rate: 48000, no pass-through)
02:36:11 T:1804227936   DEBUG: CActiveAE::DiscardStream - audio stream deleted
02:36:11 T:1804227936   DEBUG: CActiveAE::ClearDiscardedBuffers - buffer pool deleted
02:36:11 T:1927676016   DEBUG: Previous line repeats 1 times.
02:36:11 T:1927676016   DEBUG: CDVDPlayerAudio:: synctype set to 0: clock feedback
02:36:11 T:1936608240   DEBUG: CDVDPlayer::HandleMessages - player started 1
02:36:11 T:1936608240   DEBUG: void CDVDDemuxPVRClient::ParsePacket(DemuxPacket*) - {0} profile changed from -99 to 100
02:36:11 T:1936608240   DEBUG: void CDVDDemuxPVRClient::ParsePacket(DemuxPacket*) - {0} level changed from -99 to 40
02:36:11 T:1936608240  NOTICE: Opening stream: 0 source: 256
02:36:11 T:1936608240  NOTICE: Creating video codec with codec id: 28
02:36:11 T:1936608240   DEBUG: CDVDFactoryCodec: compiled in hardware  support: AMCodec:yes MediaCodec:yes OpenMax:no libstagefright:yes  RKlibstagefright:yes VDPAU:no VAAPI:no iMXVPU:no
02:36:11 T:1936608240   DEBUG: FactoryCodec - Video: amcodec - Opening
02:36:11 T:1936608240    INFO: DVDVideoCodecAmlogic: Opened Amlogic Codec
02:36:11 T:1936608240   DEBUG: FactoryCodec - Video: am-h264 - Opened
02:36:11 T:1928223608   DEBUG: CAMLCodec::CloseDecoder
02:36:12 T:1936608240   DEBUG: set caching from pvr to done. audio (1) = 17. video (1) = 13
02:36:12 T:1936608240   DEBUG: CDVDPlayer::SetCaching - caching state 0
02:36:12 T:1927676016   DEBUG: CDVDClock::Discontinuity - CDVDPlayerAudio::HandleSyncError1 - was:-5011701.333333, should be:-5013682.333751, error:-1981.000417
02:36:12 T:1928223608   DEBUG: CAMLCodec::SetSpeed, speed(1000)
02:36:12 T:1928223608   DEBUG: CDVDPlayerVideo - CDVDMsg::GENERAL_RESYNC(-3539745.000000, 0)
02:36:12 T:1928223608   DEBUG: CAMLCodec::OpenDecoder, android version 19
02:36:12 T:1928223608   DEBUG: codecid_to_vformat, id(28) -> vformat(2)
02:36:12 T:1928223608   DEBUG: codec_tag_to_vdec_type, codec_tag(28) -> vdec_type(4)
02:36:12 T:1928223608   DEBUG: CAMLCodec::OpenDecoder hints.width(1920),  hints.height(1080), hints.codec(28), hints.codec_tag(0), hints.pid(1)
02:36:12 T:1928223608   DEBUG: CAMLCodec::OpenDecoder  hints.fpsrate(1000000), hints.fpsscale(40000), hints.rfpsrate(0),  hints.rfpsscale(0), video_rate(3840)
02:36:12 T:1928223608   DEBUG: CAMLCodec::OpenDecoder hints.aspect(1.777778), video_ratio.num(1), video_ratio.den(1)
02:36:12 T:1928223608   DEBUG: CAMLCodec::OpenDecoder hints.orientation(0), hints.forced_aspect(0), hints.extrasize(148)
02:36:12 T:1782591720   DEBUG: ------ Window Deinit (DialogSeekBar.xml) ------
02:36:12 T:1928223608   DEBUG: ERROR:write header failed!
02:36:12 T:1928223608   DEBUG: [int write_av_packet(am_private_t*, am_packet_t*)]write header failed!
02:36:12 T:1928223608   DEBUG: CAMLCodec::SetSpeed, speed(1000)
02:36:12 T:1928223608   DEBUG: ERROR check in pts error!
02:36:12 T:1928223608   DEBUG: check in pts failed
02:36:12 T:1928223608   DEBUG: ERROR check in pts error!
02:36:12 T:1928223608   DEBUG: check in pts failed
02:36:12 T:1928223608   DEBUG: ERROR check in pts error!
02:36:12 T:1928223608   DEBUG: check in pts failed
02:36:12 T:1928223608   DEBUG: ERROR check in pts error!
02:36:12 T:1928223608   DEBUG: check in pts failed
02:36:12 T:1928223608   DEBUG: ERROR check in pts error!
02:36:12 T:1928223608   DEBUG: check in pts failed
02:36:12 T:1928223608   DEBUG: ERROR check in pts error!
02:36:12 T:1928223608   DEBUG: check in pts failed
02:36:12 T:1928223608   DEBUG: ERROR check in pts error!
02:36:19 T:1928223608   DEBUG: ERROR check in pts error!
02:36:19 T:1928223608   DEBUG: check in pts failed
02:36:19 T:1928223608 WARNING: CDVDMessageQueue(video)::Get - asked for new data packet, with nothing available
02:36:19 T:1928223608   DEBUG: ERROR check in pts error!
02:36:19 T:1928223608   DEBUG: check in pts failed

**GuRu** · 22 February 2015, 21:05

Openelec 5.0.3, kodi 14.1, kernel 3.10.61 dvb-s2 sat version

for VS-IP015, the image under the SD card
- Base Openelec 5.0.3, kodi 14.1, kernel 3.10.61
- Working wi-fi
- Optimization of channel switching
- Tvh client

oe_vitmod_1.4.img.zip
service.multimedia.tvheadend-4.3.9.zip yadi.sk

**Guest** · 22 February 2015, 22:49

[ROM] OpenELEC for Amlogic-based TV boxes (M8, MXQ, TV110, MX2/G18)

Originally posted by IMFan View Post

It could be a Panasonic specific issue.
I have read about this exact issue. I believe it had something to do with the way the Panasonic handles the hdmi handshake and i know of one case where Panasonic had offered to replace the TV...

It's strange because it was not on the version before. So I don't know what is changed?

**d3xt3r** · 23 February 2015, 03:24

Hi code,first congratulations and thanks for your work

Only I have a problem with the server allmyvideos.net and vidspot, I have video but no sound. Is it normal? Is there a solution?
Thanks and sorry for my english

**JinKim** · 23 February 2015, 04:51

Originally posted by osdieman View Post

@ Codesnake : Thank you for your nice work

Thank you for this great software for my M8 Box.. so far most things working fine.. but i have one little problem..
For some reason i cannot get the audio from the 3.5mm jack plug.. the reason i need this is because i use a small pc speaker system..
The box does send audio over hdmi to the tv but this sound is not nice so i want to send it to my speaker system..
My bad luck is my tv has no audio output..
So is there a way to enable the audio out on the 3.5mm jack??

I also found out when play music the screensaver OpenGL Spectum is running fast and slow.. so not running stable..

Regards Osdieman

Same as me as well. I have no sound with A/V output. My box is M8 S802 k200a called OTT TV BOX.I flashed OpenELEC for Amlogic 5.0 with Kodi 14.1 Helix on M8.
Working on my box is well via HDMI, but when I connect a monitor without speaker, I have any sound via a/v analogue output(3.5 mm).
This is the log of aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: AMLM8AUDIO [AML-M8AUDIO], device 0: AML PCM AML-M8-0 []
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: AMLM8AUDIO [AML-M8AUDIO], device 1: SPDIF PCM dit-hifi-1 []
Subdevices: 1/1
Subdevice #0: subdevice #0
I have edited /storage/.config/asounf.conf as below.
pcm.!default { type hw card 0 device 0 format S16_LE }
ctl.!default { type hw card 0 }
However, didn't work. Would anyone give me information related this issue?
Once the a/v analogue output works properly, after just flashing the firmware with SD card and edit /storage/.config/asound.conf as device 1 -> device 0 . It can be working well unless power off(not reboot).
I think the sound control by ALSA is only available in warm-booting(reboot via ssh or xbmc reboot) without kernel load. Once the system is powered off then on, device 0 ( a/v analogue output ) won't work.

**IMFan** · 23 February 2015, 09:55

Originally posted by wackidth View Post

It's strange because it was not on the version before. So I don't know what is changed?

Yes, the one case i heard of was an on and off thing between specific builds as well.
Does the problem exist on another brand TV..?

**IMFan** · 23 February 2015, 09:58

Originally posted by d3xt3r View Post

Hi code,first congratulations and thanks for your work

Only I have a problem with the server allmyvideos.net and vidspot, I have video but no sound. Is it normal? Is there a solution?
Thanks and sorry for my english

That is way too little information to say anything about it unfortunately

**vermillion** · 23 February 2015, 10:39

Originally posted by JinKim View Post

Same as me as well. I have no sound with A/V output. My box is M8 S802 k200a called OTT TV BOX.I flashed OpenELEC for Amlogic 5.0 with Kodi 14.1 Helix on M8.
Working on my box is well via HDMI, but when I connect a monitor without speaker, I have any sound via a/v analogue output(3.5 mm).
This is the log of aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: AMLM8AUDIO [AML-M8AUDIO], device 0: AML PCM AML-M8-0 []
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: AMLM8AUDIO [AML-M8AUDIO], device 1: SPDIF PCM dit-hifi-1 []
Subdevices: 1/1
Subdevice #0: subdevice #0
I have edited /storage/.config/asounf.conf as below.
pcm.!default { type hw card 0 device 0 format S16_LE }
ctl.!default { type hw card 0 }
However, didn't work. Would anyone give me information related this issue?
Once the a/v analogue output works properly, after just flashing the firmware with SD card and edit /storage/.config/asound.conf as device 1 -> device 0 . It can be working well unless power off(not reboot).
I think the sound control by ALSA is only available in warm-booting(reboot via ssh or xbmc reboot) without kernel load. Once the system is powered off then on, device 0 ( a/v analogue output ) won't work.

Best I have gotten so far by messing with asound.conf is buzzing from the av port when sound should be playing. Has the av port produced sound on any of these builds?

**d3xt3r** · 23 February 2015, 13:38

Originally posted by IMFan View Post

That is way too little information to say anything about it unfortunately

I have tvbox mx, openelec 5.03,problem witch server in pelisalacarta and Genesis,

Announcement

Announcement

[ROM] OpenELEC for Amlogic-based TV boxes (M8, MXQ, TV110, MX2/G18)

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

What's Going On