MK808B clones, how to identify them.

[ygolonak]

this is my device, could someone please tell me which rom works, I'm desperate, thanks

[rdsok]

[ATTACH=CONFIG]4848[/ATTACH][ATTACH=CONFIG]4849[/ATTACH]

this is my device, could someone please tell me which rom works, I'm desperate, thanks

There have been several links to ROM's that support yours with the RK3066 and using a AP6210 WiFi/BT chipset... This is the info you need to know when looking at other ROM's to try.

See my post #150 ( not the best ROM in my opinion ), post #154 also has links to some... and my post #161 has a link to the one I ended up using before I switched to a quad core device.

[ygolonak]

There have been several links to ROM's that support yours with the RK3066 and using a AP6210 WiFi/BT chipset... This is the info you need to know when looking at other ROM's to try.

See my post #150 ( not the best ROM in my opinion ), post #154 also has links to some... and my post #161 has a link to the one I ended up using before I switched to a quad core device.

thanks for your answer, probe all of them, and my unit turns on the light but does not start anything, the screen is black, can not be the same device. or maybe it is broken.

[rdsok]

thanks for your answer, probe all of them, and my unit turns on the light but does not start anything, the screen is black, can not be the same device. or maybe it is broken.

A bad device or bad cable aside... and assuming you did flash them properly following the instructions

Check that you have the HDMI cable plugged in good on both sides... also test on another brand of TV just in case your TV is partly at fault. If you have another PSU you can try that supplies enough power... check that also.

[ygolonak]

A bad device or bad cable aside... and assuming you did flash them properly following the instructions

Check that you have the HDMI cable plugged in good on both sides... also test on another brand of TV just in case your TV is partly at fault. If you have another PSU you can try that supplies enough power... check that also.

thanks for your answer, checked cable, power, another tv. I did step by step as manual flash and does not turn screen. It seems as if the video output malfunction. if it were not for that once saw two penguins would think that the video output is wrong. thanks

[eddieaok]

Newbie Hossen Mk808B from Amazon UK

Hello everyone I have just recieved this MK808B from Hossen hope the picture is detailed enough.

Can you point me to suitable ROM's for this device

Thanks

Ed

[bazray]

Here is a link to many roms and apps for various clones

http://pan.baidu.com/share/home?uk=2134144741&view=share#category/type=0

I found my mk808b rom on page 2

I found mine after trying various roms, i don't know anything about them so try at your own risk.

Good luck

[phinc]

Hello everyone I have just recieved this MK808B from Hossen hope the picture is detailed enough.

Can you point me to suitable ROM's for this device

Thanks

Ed

Show us the other side of the board.

[mariana23]

Help with Ditter V19 Rk3066

I bought and android tv Ditter V19 Rk3066 but since I have it, it doesn´t work, I need help, and img or a restore archive. I only get something with MK808 Finless 1.7 but it freeze in the begining showing GOOGLE TV or the android with recovering data and sudenly stops. I have attached an image. Thanks

[eddieaok]

Other side of Board

Show us the other side of the board.

Hi Thanks for reply Phinc

Pic attached RK903 Chipset

[phinc]

If it is a rk903, all standard mk808b roms should work.

Sent from my GT-I9100 using Tapatalk

[phinc]

CAUTION!
If you have this hardware:


Do not flash any of the standard AP6210 firmwares, this stick seems to refuse to boot on any of them. If you have this device, it would be very helpful if you could share a backup of your firmware (how to backup).

[mariana23]

Here the photo

CAUTION!
If you have this hardware:

[ATTACH=CONFIG]5073[/ATTACH]
Do not flash any of the standard AP6210 firmwares, this stick seems to refuse to boot on any of them. If you have this device, it would be very helpful if you could share a backup of your firmware (how to backup).

Hi can you help me? I dont have any backup, sorry, i have proved a lot of firmwares but they didnt work.

[San0k]

thanks for your answer, probe all of them, and my unit turns on the light but does not start anything, the screen is black, can not be the same device. or maybe it is broken.

I have same device and same problems!
Anyone has backup from same clone of MK808B ?

[San0k]

Only T005 firmwares works. But without wifi/bt.