Beelink X2 H3 box

[TRIGTOP]

Dear All,
Had done some updates and release new image.
Version:x2_106k4_20150914
features:
1, 1080p UI, allwiner logo;
2, 720P60Hz default resolutions;
3, Key"1/a" on Remote controller to switch resolutions, 720p60hz / 1080p60hz / 4k30hz .
4, OTA server update.

download link:
just for USB cable update: https://mega.nz/#!00BD1SCB!-g2e8sJdA..._b6SvOYU9qcUhQ
106k

update method:
2, USB cable download

tool: PhoenixSuit_EN_V1.0.8.exe. Please read its user guide "PhoenixSuit user guide EN.pdf".

steps1: download update_X2_V103k4.img and phonixsuit. prepara an A-A male USB cable.
steps2: install phonixsuit on your PC (win7 or other OS) and open it. Locate update_X2_V103k4.img in the download page.
steps3:Connect USB cable to PC.
steps4:On the bottom of the BOX and near the Power connector, there is a hole and an update key inside. Pressing the key through the hole with a pin ,and then plug the another side of the USB cable to the BOX USB port,the one nearby the power. The usb cable will supply power and the box will enter update state. Then PC will pop a note ,ask whether to earse the data.Loose you hand pressing update key and selec "yes" and then download action starts.
note : it will produce a whole new system, your old data will lose.

[TRIGTOP]

New device built with 106k4 image, which is 720p UI.
The next version will add some KODI patchs.

[Hairybiker]

Is that key disable-able? I use 1/4/7/2/5 on my keyboard as kodi shortcuts.

[TRIGTOP]

Is that key disable-able? I use 1/4/7/2/5 on my keyboard as kodi shortcuts.

Every pressing the "1/a" key, the resolutions switchs another one, and loops around 720p60/1080p60/4k30 . It was an useless key.

[Hairybiker]

As I say I AM using the 1 (& the 4/7/2&5 keys) in Kodi, normally Kodi can't remap them if the android system has control of it (like Home etc)

[budgetgeek]

TRIGTOP does your company have anything to do with this box?

http://promotion.geekbuying.com/promotion/x3_tv_box

Does anyone know any details on the X3 H3 box?

[RISCy Dude]

I see from the ad, it has the I.P.C., Intensified Performance Configuration. So if you need the IPC, you're good to go.
Seriously though, I see little to differentiate it from the other H3s. That case has been used by some other low budget boxes before. If the promised RemixOS works well, that might be a plus.

[TRIGTOP]

As I say I AM using the 1 (& the 4/7/2&5 keys) in Kodi, normally Kodi can't remap them if the android system has control of it (like Home etc)

Hi Hairybiker,
I get it now. The new defination of "1/a" key donot affect and the other keys. If the 1/4/7/2/5 keys can be used as special fuctions, they will be active too in the new version image.
Thanks.

[bluesmanuk]

Dear All,
Had done some updates and release new image.
Version:x2_106k4_20150914
features:
1, 1080p UI, allwiner logo;
2, 720P60Hz default resolutions;
3, Key"1/a" on Remote controller to switch resolutions, 720p60hz / 1080p60hz / 4k30hz .
4, OTA server update.

download link:
just for USB cable update: https://mega.nz/#!00BD1SCB!-g2e8sJdA..._b6SvOYU9qcUhQ
106k

update method:
2, USB cable download

tool: PhoenixSuit_EN_V1.0.8.exe. Please read its user guide "PhoenixSuit user guide EN.pdf".

steps1: download update_X2_V103k4.img and phonixsuit. prepara an A-A male USB cable.
steps2: install phonixsuit on your PC (win7 or other OS) and open it. Locate update_X2_V103k4.img in the download page.
steps3:Connect USB cable to PC.
steps4:On the bottom of the BOX and near the Power connector, there is a hole and an update key inside. Pressing the key through the hole with a pin ,and then plug the another side of the USB cable to the BOX USB port,the one nearby the power. The usb cable will supply power and the box will enter update state. Then PC will pop a note ,ask whether to earse the data.Loose you hand pressing update key and selec "yes" and then download action starts.
note : it will produce a whole new system, your old data will lose.

Will there be an OTA version of this released?

[bluesmanuk]

New device built with 106k4 image, which is 720p UI.
The next version will add some KODI patchs.

What kind of kodi patches will they be and how will they correct issues/add functionality?

[TRIGTOP]

TRIGTOP does your company have anything to do with this box?

http://promotion.geekbuying.com/promotion/x3_tv_box

Does anyone know any details on the X3 H3 box?

Thanks Budgetgeek's informations greatly.
It does no relationship with TRIG.
(As be told , because there is X2, so its name changed to X3 from cx-968. Ha)

[superceleron]

Well im waiting for mine, i hope for those Kodi fixes...

[mino182]

Every pressing the "1/a" key, the resolutions switchs another one, and loops around 720p60/1080p60/4k30 . It was an useless key.

Hi this key open notification bar in android. It was only way to open it with remote. So in this rom is it not possible? Thanks.

[TRIGTOP]

Hi Mino182,
Clever discovery. The device readme donot mention this function.
Yes. In this new rom ,you cannot open notification bar with remote controller but with mouse.
Mino182, do you think it is a proper decision?

Thanks.

[Almocho]

Great thanks Trigtop!!, I have now a box for my TV, hope you 'll add some features in a new update, this box seem to have poor Wi-Fi.
I tried to flash it like 5 several times with different firmwares all was bad because of the non supported mode.
Great job!!