[ROM] AlfaWise H96 PRO+ 3/32 and 3/16 - SCV2 ROM (DDR3 ONLY)

[rommor]

georgesat20
It is better not to risk it! Boxes with chips PPE09-093-DG after flash memory die !!! Check your chip.
I know many people who killed their boxes!

[georgesat20]

Thanks for your replies guys...
Who to check my chip?

[rommor]

Thanks for your replies guys...
Who to check my chip?

Open box

[wwmoggy]

theres two small tabs to press in at the back . hold them in and pry bottom off . then remove the screws holding the mother board in place and look theres a surprise 2 extra usb ports inside and they work just need to cut the opening for them . and check the chipsets

[georgesat20]

I will check tomorrow because i 'm at work now
Thanks again

[ReaperMan]

Heya,
superceleron, great effort again, impressed with your dedication to helping so many people.

Alfawise-
Antutu- average 42 000 peaked 43 000. Garden demo (video still pulses) sound does not crackle now!
Wifi - 180 Mbps + no drop-outs.
Sound- seems to keep working.
Cursor- has not disappeared.
Youtube- 4K runs better now(?)..need to test more.
SPMC- runs..not tested yet.

Thanks
Reap

P.s. Sending small () donation.

[wwmoggy]

41395 - 41500 one test hit 42035

not using wifi . kodi 17 and spmc

[Stan77]

Installed V2. Everything seem good and snappy but found out that when cold start the box, it will not detect the TV. Need to tick the the reset button in order to connect. Anyone experience this?

[georgesat20]

theres two small tabs to press in at the back . hold them in and pry bottom off . then remove the screws holding the mother board in place and look theres a surprise 2 extra usb ports inside and they work just need to cut the opening for them . and check the chipsets

Check please my friends

[rommor]

This is good. I think you can sew!

[ReaperMan]

Fasttech -H96 Pro+
Antutu- average 40 000 peaked 41 050. Garden demo (video still pulses) sound does not crackle now!
Wifi - 180 Mbps + (speedtest.net app).... hour later... 45 Mbps + had upload error (connection error or buffers too large ... Dslreports.com/speedtest) Reboot fixed? error.
Sound- seems to keep working.
Cursor- has not disappeared.
Youtube- 4K runs better now, still have to change quality on each video to 2160p as they default to 720p

SPMC- runs...runs dark...run SPMC, run.
Tried Box Fix app. Settings on 10 finish at 21. Browser text is starting to wash-out, SPMC is dark.
Alfawise- lucky 13 setting for desktop fine and SPMC interface lighter.

*Boot logo is murky dark on Fasttech box* I'll double check Alfawise later.

Still testing a few things...maybe have time to actually watch a movie

Reap

[Mauretto]

Hi all,
is possibile to setting the rom in italian language?
Thank's

[georgesat20]

Check please my friends

I see chip is PE029-125F1638
can I use this rom on my H96?
Thanks in advance

[rommor]

georgesat20
PE029 good chip

[ReaperMan]

Heya,
Something amis, Fasttech and Alfawise, with HDMI 1.4 and 2.0.
When changing by remote between 1.4 inputs...technicolor noise displays for 1-2 seconds before settling in.

I switched ports from 1.4 (30Hz) to 2.0(60Hz) to test boot speed etc.
1. Unrooted boots from logo approx. 28-38 seconds.
2. Rooted HDMI 1.4 boots from logo approx. 48-ish seconds. (Understandable delay -SuperSu)
3. Rooted HDMI 2.0 boots from logo approx. 66 seconds. ( **)

**@ HDMI 2.0 the desktop/launcher runs for about 10 seconds then screen blacks with [No Signal] -Vizio**

If I pull> <plug the HDMI cable the desktop is active for about 5 seconds then blacks to [No Siginal].
If I pull> <plug power supply I have [No Signal], then, if I hotplug the HDMI back to 1.4 port the box is fully booted.
Does the 'box-fix CEC' address the HDMI 2.0 issue????
Do I need to change Android >Display settings?

......For a moment I thought I lost another box hmmm more like.....

Reap