OpenELEC for s82, M8, MXIII, Tronsmart S89

[clarkss12]

Problems for me on 5.0.5 s82 build as mac address changes on each reboot.

Thanks for that valuable information.

[clarkss12]

Problems for me on 5.0.5 s82 build as mac address changes on each reboot.

Can you test if you can write to a micro SD card using 5.0.5.

thanks

[ccadi]

Can you test if you can write to a micro SD card using 5.0.5.

thanks

Theres a replacement 505 on the site, I had similar problems to you. Trying replacement now

Installed via recovery, said successful but booted to black screen and a bit of a toil to get back to recovery

[clarkss12]

Theres a replacement 505 on the site, I had similar problems to you. Trying replacement now

Installed via recovery, said successful but booted to black screen and a bit of a toil to get back to recovery

Yes, I saw that, wish he would tell us what he changed. Since I am using my box as a stand alone DVR, writing to the micro SD card is a must. Also, it has to keep the same mac address.

[ccadi]

Back on 5.0.3 due to booting to black screen.

[giglife]

I have a MXIII branded to HausBell dont know if this means anything, Its a 2GB ram version.
I have downloaded a bunch of the OPENELEC images with the name MX3 in the file name. NONE will work. I get boot logo for about 4 secs and then black screen. the box just does nothing. I can then recovery and reflash to a working stock or another rom.
I even tested : OpenELEC-Amlogic.S82.arm <--- bad move after flashing this image the system folder seemed to have moved. anything I did after that would = ERROR 7 and abort the install.
I then used USB BURNER TOOL to reflash the box to a stock M82_108k4.img , That was fine. right after it flashed it rebooted.

So my list
OpenELEC-Amlogic.MX3.arm-4.97.2 to OpenELEC-Amlogic.MX3.arm-5.0.3
I have tested and all result in a blackscreen after the boot logo

anyone know whats up

[RedNas74]

Can you test if you can write to a micro SD card using 5.0.5.

thanks

Still can't write to sd with 5.0.5. The last version that worked was 5.0.0.

Also I get frameskips at 24p.

I'm using the last version compiled today. Guess i'll go back to 5.0.0. for the time being.

[clarkss12]

Still can't write to sd with 5.0.5. The last version that worked was 5.0.0.

Also I get frameskips at 24p.

I'm using the last version compiled today. Guess i'll go back to 5.0.0. for the time being.

Thanks for that information. Saves me from trying 5.0.5.

[giglife]

already so after messing around and looking threw the folders on the .ru site i came to find a file called : http://amlinux.ru/image/4.97.1/OpenE...utoinstall.zip = I downloaded that added it to my SD and flashed. BAM the MXIII booted with the openelec boot logo.
After that i then flashed : http://amlinux.ru/image/5.0.3/OpenEL...0.3-update.zip
the box works great.

some reports from my finding so far
under system info
Summary screen
Free memory is reporting 665MB free how is this if i have a 2GB unit ?
Hardware screen
Serial reports as : 1900000000000000
CPU temp reports as : 123F to 124F
Total memory : 817MB - again this is a 2GB unit why only half is shown
Free memory : 664MB

OpenELEC settings
Bluetooth : No BlueTooth Adapter Found.

Wireless and Wired work no problem

unit shows 4 cores running



I know the serial number dont matter , The cpu temp is just BS as i feel the unit and its not baking.
The one thing that i have a ? about is the ram. how can i tell this is really a 2GB ram. without opening it ? How the hell do i open it anyway ?

[MikeD]

I think you have to try again the s82 build. These are made for 2GB devices. The mx3 are for 1GB devices. Therefore you have only 1GB with this build.

[giglife]

MikeD - thanks that now worked.
still no BT but memory shows as 2GB now

also good to know CEC works on this no more IR crappy remote. now i can use my sony remote with my tv so much better. This box gets better and better as i play with it.

[pelops]

Hi there,

i have the m8 2gb with the roundish remote and I use the S82 image 5.0.3 ,
I thing it's run smoothly, sec is working so i use my sony tv remote but the original remote does not work.
Is usefull to wok with the original remote bgecause when the standby problem fixed you can power on the device with it.

[MikeD]

Use this version:

http://amlinux.ru/image/5.0.3/OpenELEC-Amlogic.M8.arm-5.0.3-update.zip

This is build for M8 and your remote should work with it.

[pelops]

Use this version:

http://amlinux.ru/image/5.0.3/OpenELEC-Amlogic.M8.arm-5.0.3-update.zip

This is build for M8 and your remote should work with it.

I have allready tried this version but the device freezes after the first configuration screen.
With the s82 version the device works perfect except the rc which is not so problem because of sec and I prefer that. I wnder if I could replace the "remote.conf" file from the m8 version, will it works?

[MikeD]

You could use original remote.conf from the stock firmware (or from M8 openelec) and place it in /storage/.conf. Then this will load on every booting and you can use your RC with openelec. But you won't be able to boot the box with your original remote because that is fixed to a remote in every build and can't be changed.
Try updating to the M8 version by placing the update.tar in /storage/update and reboot. Maybe that works without freezes.