[ROM] Superceleron 1.4B, MK808B Plus AP6210/6212 and Clone RT8723 and MXQ S85.

[superceleron]

Weird... it have to work i tested myself...
Use this : https://mega.nz/#!hxRAjQbD!3Ryb0yqlf...0TEjml950q099s
Extract to the root or the sdcard(dont extract the Mini-Gapps-for-Superceleron_1.4.zip only the 7zip...) and put the sd in the device and reboot to recovery or boot to recovery by toothpick method.

[Badmc]

Sadly no lucky with this file either

Regards

[pekmd]

Is it possible to flash your firmware using usb burning tool?
Thx

[superceleron]

Sadly no lucky with this file either

Regards

Damm, can you go to twrp recovery and wipe(format) dalvik cache and cache?
To see if thats the problem, its weird some people simple cant flash and others can...
Really weird.

Is it possible to flash your firmware using usb burning tool?
Thx

No

[pekmd]

Damm, can you go to twrp recovery and wipe(format) dalvik cache and cache?
To see if thats the problem, its weird some people simple cant flash and others can...
Really weird.



No

Can u get me default rom for EC-MK808B Plus(clone)?
I think it's 128k3, is it in img format?
thx

[superceleron]

Can u get me default rom for EC-MK808B Plus(clone)?
I think it's 128k3, is it in img format?
thx

Post #144

[Badmc]

Damm, can you go to twrp recovery and wipe(format) dalvik cache and cache?
To see if thats the problem, its weird some people simple cant flash and others can...
Really weird.

Done, and same result.
by the way I realiced that I have been using a Micro SD class 4, maybe it could affect but I flashed correctly TWRP recovery and the ROM with the same sd card.

For a while I solved this issue flashing pico gapps from http://opengapps.org/ and market helper.

Regards

[superceleron]

Done, and same result.
by the way I realiced that I have been using a Micro SD class 4, maybe it could affect but I flashed correctly TWRP recovery and the ROM with the same sd card.

For a while I solved this issue flashing pico gapps from http://opengapps.org/ and market helper.

Regards

damm looks like i need to rls the roms with google apps already in :/
Need to think about it.

[xefe]

i think you should. I have an original mk808b plus (111k4) and after many hours trying to install gapps, i gave up and rolled back to stock using amlogic usb burning and then finless 1.1 again.

[abhinav.ag]

I downloaded the rom file, renamed it to update.zip and ran the update app. The stick rebooted into twrp and came out very quickly. Then it reboots back to mbox. Am I missing any step here?

[mowgli]

Installed this ROM, all is good except for USB to Ethernet adapter, it just cannot see it, asks to plug the cable. May be I am missing some settings ?
On 109 stock firmware it worked out of the box.
Thank you!

[superceleron]

I downloaded the rom file, renamed it to update.zip and ran the update app. The stick rebooted into twrp and came out very quickly. Then it reboots back to mbox. Am I missing any step here?

Use a usb pen, formated as fat32.

Installed this ROM, all is good except for USB to Ethernet adapter, it just cannot see it, asks to plug the cable. May be I am missing some settings ?
On 109 stock firmware it worked out of the box.
Thank you!

What port are you using? otg? if you are using the otg use the normal usb port.
To enable eth you enable it on old settings and not on Mbox Settings and change to usbeth0, see my video....
And what chip is your eth adapter?
109 and this one are not the same kernel... maybe i missed some driver!

[mowgli]

To enable eth you enable it on old settings and not on Mbox Settings and change to usbeth0, see my video....

I was using an OTG port, because it has mini USB connector. probably the issue was because I was trying to enable it in the MBox settings. I'll try what you said tonight. Thank you!

[superceleron]

I was using an OTG port, because it has mini USB connector. probably the issue was because I was trying to enable it in the MBox settings. I'll try what you said tonight. Thank you!

If you use the otg port don' disable the wifi, leave it on and of course not connected

[mowgli]

If you use the otg port don' disable the wifi, leave it on and of course not connected

It worked Thank you!