[ROM] Android TV (7.1.2) Beelink GT1 (Multi 6255 & 9377 Standard+Ultimate)

[kole]

Hello
I just report a problem with the remote control vorke h1 air Mouse, the power button has no effect on the box beelink gt1 .. How to solve the problem. Thank you

[tillaz87]

Hello
I just report a problem with the remote control vorke h1 air Mouse, the power button has no effect on the box beelink gt1 .. How to solve the problem. Thank you

needs to learn the IR code from original remote, and i'm not sure how i did it as the instructions are broken english.

on h1 press ir button then hold the power button for few seconds. now point original remotes receiver close up to h1s receiver and press power button on original remote

[kole]

How do I do to have the IR code of the original remote control? Does a simple and fast solution exist?

[tillaz87]

How do I do to have the IR code of the original remote control? Does a simple and fast solution exist?

read the instructions for the remote (IR learning)

[kole]

The H1 does not work ... No more buttons work ... Power button only blinks when pressing a key

[tillaz87]

The H1 does not work ... No more buttons work ... Power button only blinks when pressing a key

need to read the manual for the remote as its not a rom retaliated, its just unpaired. the manual shows how to pair. try unplug/replug first

[kole]

I will try to do it because not obvious explanations. The H1 must remain in programming mode ... It will be necessary that the problem be solved

[tillaz87]

Vorke z6 update just before Christmas aka "all in one firmware" might do something based on it, wonder if it fixed BT stutter

http://www.vorke.com/project/support-vorke-z6-2/

[kole]

Good for beelink gt1 and other...

Edit:
The remote Vorke H1 is fully operational after having sought how to reset .......

[kwatto]

tested on mini m8s pro (firmware 705N) and it works!

[manvel]

Vorke z6 update just before Christmas aka "all in one firmware" might do something based on it, wonder if it fixed BT stutter
http://www.vorke.com/project/support-vorke-z6-2/

No, I tested Vorke z6 new firmware: it is nice: with root switch and different version of auto frame rate, but Bluetooth audio is still not installed in right way for qca9377 chipset : one should replace/add the following files:
BTsystem.zip
to get it working

[kole]

Hello

I have a request ...
I own a remote vorke h1 and I would add the parameter button on the remote beelink GT1 ...
is it possible ?

[tillaz87]

Hello

I have a request ...
I own a remote vorke h1 and I would add the parameter button on the remote beelink GT1 ...
is it possible ?

You can learn it from original remote to the colored buttons along the bottom same as the power button

[kole]

I did not do anything for the power button ... just reset the remote


I will try

edit:
Sincerely, I do not see how ..... not smart !!!!!

[tillaz87]

I did not do anything for the power button ... just reset the remote


I will try

edit:
Sincerely, I do not see how ..... not smart !!!!!

You should be to follow this https://ibb.co/fbEAxG