[ROM] Android TV (7.1.2) Beelink GT1 (Multi 6255 & 9377 Standard+Ultimate)

[tillaz87]

Basically that is what is in your original script? Haven't looked at it for some time. Maybe having the script run would help with typo issues for first timers.

No "reboot update" is same mode burn tool uses not sure what mode it is as its not bootloader mode or recovery.

The original script first extracts recovery from the zip flashes it then tells twrp what to do then reboots recovery.

I'm not even sure the stock recovery is needed as I've never used boot card maker before. But thinking about the mode it uses it's not recovery so..

[iliasv82]

If you setup boot card maker with this rom you would just insert the sdcard then open terminal app and do

reboot update

It should reboot and start the install

So, I had a logo telling me that it's updating for 20-30 minutes. the led indicator of the box wasn't on. The the tvbox shouts down. I tried to boot it up with the remote and nothing happened. Then I unplug the re plug the power cord and still no signal from the hdmi. The led light of the box is on.

Have I bricked my box?

[tillaz87]

So, I had a logo telling me that it's updating for 20-30 minutes. the led indicator of the box wasn't on. The the tvbox shouts down. I tried to boot it up with the remote and nothing happened. Then I unplug the re plug the power cord and still no signal from the hdmi. The led light of the box is on.

Have I bricked my box?

take the card out, unplug for 60 seconds try power on

[tillaz87]

When using boot card maker the option "To partition and format" needs to be ticked

[tillaz87]

Make it again doing that. insert sdcard then unplug power for 60 seconds then plug power back in.

Install should start

[JoseM]

don't know if anyone had this problem before (i can't give a sd card permission (only can read files from it) this error (Warning android was unable to display the required permissions screen) maybe it's magisk 16.2 bug or maybe my sd card is broken any idea ?

[iliasv82]

Make it again doing that. insert sdcard then unplug power for 60 seconds then plug power back in.

Install should start

I re flash the ROM to the sdcard and checked the format & partition.
I unplug and re plug the power after 2 minutes.
20 have passed and HDMI no signal.

[tillaz87]

I re flash the ROM to the sdcard and checked the format & partition.
I unplug and re plug the power after 2 minutes.
20 have passed and HDMI no signal.

try with stock

[iliasv82]

try with stock

OK, but I don't know how to do that..

[tillaz87]

OK, but I don't know how to do that..

what file did you load in boot card maker?

[iliasv82]

what file did you load in boot card maker?

From the following link:

https://mega.nz/#F!YRR2mIBI!yr1hReLX08NyDgSu1Rrneg

The following file:
MULTI_Z6BASED_ATV10.5.img

[tillaz87]

From the following link:

https://mega.nz/#F!YRR2mIBI!yr1hReLX08NyDgSu1Rrneg

The following file:
MULTI_Z6BASED_ATV10.5.img

what size is your card?

[kole]

Which card do you use?

[iliasv82]

what size is your card?

Transcend 2Gb

[tillaz87]

Transcend 2Gb

I doubt its big enough, on stock the system partition is 2GB alone.
8GB card is the min I would think. But I would just buy a male to male USB cable.