UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

[Gets]

I am using simon720 no oc kernel. How can this thing be powered by either the dc port or the usb port? Which one is the wiser to use? Both the same?

I know this is a bit off topic for this Finless 1.6b thread. Do we know of somewhere that people are discussing this particular issue with the short abrupt video loss?

[FadeFx]

AW: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

I am using simon720 no oc kernel. How can this thing be powered by either the dc port or the usb port? Which one is the wiser to use? Both the same?

I know this is a bit off topic for this Finless 1.6b thread. Do we know of somewhere that people are discussing this particular issue with the short abrupt video loss?

Havent seen anything about it yet. I had ni time yet to test it with stock kernel, but i will give it a try later today

_________________________
tapatalked from GalaxyS3

[freakn]

pm.sleep_mode

Found an article about the sleep mode

http://www.jeffmixon.com/examining-build-prop-tweaks-android-ics-comprehensive-guide-part-2/

(search for pm.sleep_mode)

Since our device doesn't have a qualcomm chipset, is it perhaps possible to add an option to set the pm.sleep_mode to 0 instead of 1 for those who don't have a usb powered device? And will that work?

My tv doesn't have a usb slot, so I have to power the cx-919 with an adapter. I would realy like to turn the device "on" with my bluetooth airmouse
(or even better...the device can go into deepsleep but bluetooth stays on :-))

[FadeFx]

AW: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

Found an article about the sleep mode

http://www.jeffmixon.com/examining-build-prop-tweaks-android-ics-comprehensive-guide-part-2/

(search for pm.sleep_mode)

Since our device doesn't have a qualcomm chipset, is it perhaps possible to add an option to set the pm.sleep_mode to 0 instead of 1 for those who don't have a usb powered device? And will that work?

My tv doesn't have a usb slot, so I have to power the cx-919 with an adapter. I would realy like to turn the device "on" with my bluetooth airmouse
(or even better...the device can go into deepsleep but bluetooth stays on :-))

As i read that article, pm.sleep_mode has nothing to do with powering down the device itselfs, but with deep sleep state of cpu which we most likely (didnt check yet though) never reach at all, as these devices do not fall to sleep at all (No screen timeout and such stuff)

Futhermore:

This second issue is, as I mentioned earlier, that this property does not exist anywhere in the ICS code base. This means that adding this value to your build.prop will have no effect at all. This parameter is a kernel parameter and will only work when passed directly to the kernel on boot.

_________________________
tapatalked from GalaxyS3

[malditango]

cx 919ll

hello this update work for the new CX-919 ll from aliexprees???

[FadeFx]

AW: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

hello this update work for the new CX-919 ll from aliexprees???

No, you need to wait and hope...

_________________________
tapatalked from GalaxyS3

[freakn]

As i read that article, pm.sleep_mode has nothing to do with powering down the device itselfs, but with deep sleep state of cpu which we most likely (didnt check yet though) never reach at all, as these devices do not fall to sleep at all (No screen timeout and such stuff)

Futhermore:


_________________________
tapatalked from GalaxyS3

You are totally correct about this and sorry for being not clear enough :-) What i really meant was that I want to turn the screen on with my airmouse and NOT powering it on with the airmouse.
By holding the power button on the airmouse for 3 seconds the device goes into sleep and I just want to be able to wake it up again with the airmouse (but apparently bluetooth turns off as well)

So there is nothing to do about this?

[FadeFx]

AW: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

I dont think so, i use a logitech wireless keyboard and i can turn the device off, but not on again. I leave it on 24/7...

_________________________
tapatalked from GalaxyS3

[FadeFx]

AW: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

And now to something completely different... in detail my problem with the device. So i now flashed the device with stock1080 kernel and it seems that the hdmi dropouts are gone, however, i can use the device for a while and suddenly out of rhe blue, mostly when i am done with the setup or some reboots later, the screen stays blue and i have no chance to boot it up again. I have just reflashed the device several times and tried to reboot it often during setup to find out what step softbrickes it, but no special step seems to cause this but everytime it hits me out of the blue when i think now it wont happen again, so now i tried to reflash some parts of the rom like loader, kernel and boot, but no effect, then i decided to flash simon1080 kernel again and, oh wonder, it did just boot up. Now i am testing if those dropouts do reappear, but for now it looks good.

_________________________
tapatalked from GalaxyS3

[FadeFx]

AW: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

So after testing a bit more, while everything went fine first, i found out that the dropouts also happen with stock 720 kernel, but only while playing plants vs zombies 2, and thwn i realized that the device was quite hot. So i guess there is not much one can do about this yet, as rhis heating problem can only be solved by tinkering around a bit more with the kernel than a patching thing can do.
Btw, no idea what was wrong, but 1080stock kernel is not booting anymore without a full flash, all other kernels do
_________________________
tapatalked from GalaxyS3

[code_blue]

no sdcard after installing this rom + JH KERNEL

**** issue solves *****
it was only Explorer issue, with Ex Explorer i was able to see sdcard


**** **** ***** *****





Hello and thanks for this rom .

I tried installing this rom (with 4gb parameter) + JH KERNEL because I have one of the new series that HDMI doesn't work else.

after the device has booted i saw that SDcard has dissapeard

how can i bring it back ?

[cx919]

Model number

Hi
Installed the rom on my cx919 and in "about device" I see model number GT-I9300, is it ok?

[JugsteR]

Re: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

Hi
Installed the rom on my cx919 and in "about device" I see model number GT-I9300, is it ok?

Yes

Signature? Signature!

[blinkone]

Hi
Installed the rom on my cx919 and in "about device" I see model number GT-I9300, is it ok?

Yes that's what its ment to say its spoofed as a Samsung GALAXY S III so more apps & games show up in google play store.

[Guest]

Problem with mouse click

Hi all,

Just starting with my CX-919 stick and Finless ROM 1.6b.

Everything runs fine with this firmware. The only problem I detected is with my Logitech airmouse. With some games (e.g. City of Secrets), left click is totally inoperative, making the game unusable.

Any idea ?