[ROM] AlfaWise H96 PRO+ 3/16Gb - 3/32Gb - 3/64Gb - SCV4A-ATV 7.1.2 (DDR3/DDR4 - ANDROIDTV VERSION)

[mikka005]

mikka005
Did You push the reset button? Without it I coiuldnt make the Tool to flash the image.

No power cable connected, holding button while connecting USB cable. Booting to recovery options.

M.

[ch3mn3y]

mikka005
All I can say that I do it like this: Start Tool -> Open image -> Wait -> Connect Box -> Sometimes it's seen, sometimes it's not -> Reset it for 3-5 seconds (better 5) -> It's seen - Click Start -> Wait

[mikka005]

mikka005
All I can say that I do it like this: Start Tool -> Open image -> Wait -> Connect Box -> Sometimes it's seen, sometimes it's not -> Reset it for 3-5 seconds (better 5) -> It's seen - Click Start -> Wait

no luck. usb 3.0 cable should be OK?

[ch3mn3y]

Don't think why not. But I have 2.0 only and it works, so maybe it would be better to buy 2.0 cable?

And are You sure that You have compatible device? Maybe it's sign from Odin, that You shouldn't mess with Your toy?

Truly I don;t know if mine is booting to recovery or what as I do it without having Box connected to any display.

[mikka005]

Don't think why not. But I have 2.0 only and it works, so maybe it would be better to buy 2.0 cable?

And are You sure that You have compatible device? Maybe it's sign from Odin, that You shouldn't mess with Your toy?

Truly I don;t know if mine is booting to recovery or what as I do it without having Box connected to any display.

It's a H96 pro+ unbranded device from banggood, so I think it's compatible.
I will buy a 2.0 cable, than try again.

Thanks,
M.

[ch3mn3y]

mikka005
There are so many different H96+ that just having one is not enough to make this Rom work. If You have just got it, than You probably have same device as mine (blue, S32-V6), but better check it before flashing.

[mikka005]

mikka005
There are so many different H96+ that just having one is not enough to make this Rom work. If You have just got it, than You probably have same device as mine (blue, S32-V6), but better check it before flashing.

I have already checked, mine is CZ-S32-V2.2 on green PCB

I'ts compatible as I read.

M.

[ch3mn3y]

agrinevicius
Have to change one of my answers to Your questions: TWRP does see FAT32 formatted flash drive. Don't know why it hadn't before, abut it did few minutes ago

[agrinevicius]

agrinevicius
Have to change one of my answers to Your questions: TWRP does see FAT32 formatted flash drive. Don't know why it hadn't before, abut it did few minutes ago

Thanks. I can confirm that I successfully installed SCV4A-ATV 7.1.2 into H96 Pro+ 3gb/32gb/Amlogic S912/Android 7.1.1 (No Alfawise logo) from bangood. PCB is blue, with S32-V6 (LPDDR3) 2017-09-05,

Everything works fine.

[elvis3002]

Hi guys, with the help of the great friend ch3mn3y and of course the hard work of
I manage to flash my S32-V6 blue PCB LPDDR3 with SCV4A , very nice OS !

ch3mn3y - thanks a lot! , also, I see that you switched to SCV7A - how is it? is it better than the SCV4A?

[stk00]

Enfin réussi à flacher sans passer par la sv1 directement la sv4 avec l outil de mise à jour du système de base

[ch3mn3y]

elvis3002
Don;t know, as I flashed it almost right after flashing V4 (only set it up on V4 and than rebooted to to TWRP to flash V7A).

However I don;t see any problems. DLNA is working fine, connected BT keybord (couldn;t manage to do it on stock), AirMouse is working too.

[dangchui]

hello Stk00 quelle version avais tu d origine je pense 7.1 car pour moi j ai essayé en premier cette technique


bien sur la c 'est juste la photo mais meme si marqué m8S PRO+ c'est le meme menu sur ALFAWISE H96PRO+

qui n'a rien donné en premier lieu car d abord la fonction reboot n est pas effective l alawise s eteint mais ne se rallume pas seul tout noir il faut debrancher la prise d alimentation et la rebrancher

PAR CONTRE la fonction eteindre chez moi ne fonctionne pas a 100% EN EFFET quqnd j appuis sur le bouton off de la telecommande j ai bien le menu eteindre ou redemarrer

j appui sur eteindre ca mouline ok puis ca s eteins mais reste le boitier reste en led rouge et si appui rallumage par la telecommande ca marche pas

[stk00]

Pour éteindre ta box il faut que tu mette dans les options d arrêt sur redemarer j ais eu ce problème aussi sur un modèle ensuite pour la flancher il fait que tu la démare avec le bouton de réinitialisation appuyer et le relâcher quand ta box rentre dans le mode ensuite tu pourra flacher en sv4

[ch3mn3y]

PAR CONTRE la fonction eteindre chez moi ne fonctionne pas a 100% EN EFFET quqnd j appuis sur le bouton off de la telecommande j ai bien le menu eteindre ou redemarrer
j appui sur eteindre ca mouline ok puis ca s eteins mais reste le boitier reste en led rouge et si appui rallumage par la telecommande ca marche pas

I don't speak French, but if Google Translate translated it fine, than I have similar problem, but with "Normal" (not ATV) Rom. For me Box, after using Power Off option in Power Menu, always get stuck on powering off,but it never does (have to reset it or disconnect the power plug). However there (think that in ATV it exist too) is Power Off button on NavBar. This one turns off the Box fine.