[ROM] AlfaWise H96 PRO+ 3/16Gb - 3/32Gb - 3/64Gb - SCV4A-ATV 7.1.2 (DDR3/DDR4 - ANDROIDTV VERSION)

[LSHER]

well i really dont know since i dont use plex!

You mentioned before remembering something about a similar issue with Amlogic and EAC 5.1

was this the problem?...
http://www.wetekforums.com/v/index.p...ns-problems/p2

..and do you think we could be facing similar problems with the code?

The reason i ask is I'm seeing similar problems as above in that forum post.
I get static when sound set to HDMI or SPDIF in settings and nothing when set to PCM, so it's trying to do something.

Think Amlogic code ain't translating correctly for Plex.

[spiderman1194]

Weird thing happened today, has anyone ever had there H96 Pro+ not turn on with anything even unplugging it didn't work and I just tapped the box on the Tv stand then it finally came on!! Freaking weird..


Sent from my iPhone using Tapatalk

[neutester]

Weird thing happened today, has anyone ever had there H96 Pro+ not turn on with anything even unplugging it didn't work and I just tapped the box on the Tv stand then it finally came on!! Freaking weird..


Sent from my iPhone using Tapatalk

Sounds like a connection or cable problem.

[superceleron]

You mentioned before remembering something about a similar issue with Amlogic and EAC 5.1

was this the problem?...
http://www.wetekforums.com/v/index.p...ns-problems/p2

..and do you think we could be facing similar problems with the code?

The reason i ask is I'm seeing similar problems as above in that forum post.
I get static when sound set to HDMI or SPDIF in settings and nothing when set to PCM, so it's trying to do something.

Think Amlogic code ain't translating correctly for Plex.

yes was there that i have read something about it.
And yes i think is a limitation on the aml sdk or can also be a plex problem...

[wiz569]

I have scv1 installed and now trying to get to scv4 but the box won't go into recovery mode, apart from pressing the reset button while plugging it in,is there anything else I'm missing?

Sent from my UMIDIGI Z using Tapatalk

[Lenn]

Hi,

I bought the 3/32 box in September and after some tries with sd card (update stopping after a few seconds, whatever the rom), I got a male-to-male cable and I tested the usb burning tool with this (scv1) rom.
Everything seemed OK, until it stopped at 98% with a partition error


Could somebody help me ?

[Akirainblack]

weird, it shouldn't do that, in here is ok.. go the settings turn on sleep and then come out of the settings, go there again turn off and go out again from the settings and wait...
If this dont work i need to take a closer look here!

I'm afraid it still happens, I even tried changing the screensaver in case that was causing any issues. Now the power light goes out as well rather than just going to red.

[Akirainblack]

I have scv1 installed and now trying to get to scv4 but the box won't go into recovery mode, apart from pressing the reset button while plugging it in,is there anything else I'm missing?

Sent from my UMIDIGI Z using Tapatalk

On the main screen. Bottom right icon to open the app drawer. Update from there. Select local update and point it to the v4 update. Then confirm. It'll do the rest, this is mentioned earlier in the thread.

[wiz569]

On the main screen. Bottom right icon to open the app drawer. Update from there. Select local update and point it to the v4 update. Then confirm. It'll do the rest, this is mentioned earlier in the thread.

Its mentioned earlier to update through recovery, but I tried the update app and the box just shuts down and doesn't reboot, will try again later

Sent from my UMIDIGI Z using Tapatalk

[Vagueabond]

Its mentioned earlier to update through recovery, but I tried the update app and the box just shuts down and doesn't reboot, will try again later

Sent from my UMIDIGI Z using Tapatalk

i had the same problem, maybe you have old boot android installation files on your sdcard, try to format eh card in fat32 and copy/paste on only the update/

I have a problem with the application "MyCanal" for watching TV, it doesnt work , i ve only sound...

[wiz569]

i had the same problem, maybe you have old boot android installation files on your sdcard, try to format eh card in fat32 and copy/paste on only the update/

I have a problem with the application "MyCanal" for watching TV, it doesnt work , i ve only sound...

Could be right m8 will try later and report back

Sent from my UMIDIGI Z using Tapatalk

[spiderman1194]

Sounds like a connection or cable problem.

I'm finding out now it seems like the plug isn't connecting right inside the box.. how you fix that??


Sent from my iPhone using Tapatalk

[hcardoso483]

Okay for those who are tring to update an cant get to recovery there is a work around, cpopy the recovery.img to the root of the sd card alongside with the update file scv4...zip power the box of put card in the slot press the update button same time pkug ind the cable stay holding button until twrp comes up and thats it do your update

Enviado do meu GT-N8000 através de Tapatalk

[hcardoso483]

I like to try different ROM's by different developers, as many people already know.

However my box (H96 PRO+ 3/32Gb) is STUCK on SCV4 -ATV 7.1.2 and I can NOT perform OTA updates to Superceleron's latest ROM

Does anyone know what I can do to force this box to update?

I am handy with the USB BURNING TOOL and have the proper cables needed to install a new ROM... but I can NOT get this little Box to perform OTA updates.

I used OTA software in box and box just HANGS after it reboots.

I have tried using an SD CARD using TOOTHPICK method but Box will not boot into RECOVERY mode... so I have not been able to UPDATE ROM's that way, either.

You need to do toothpic method and copy stock recoveryto the root of the sd card , the youll be god to go, sorry for so late response

Enviado do meu GT-N8000 através de Tapatalk

[neutester]

I'm finding out now it seems like the plug isn't connecting right inside the box.. how you fix that??


Sent from my iPhone using Tapatalk

Here are a couple ideas I would check:

1. Which is causing the problem the plug on the adapter or the jack on the box?
2. Could it be the plug on the adapter be manufactured wrong or defective and not connecting correctly? Have your tried another adapter?
3. Is the jack on the box cracked or broken causing a bad connection?
4. Is there a bad solder connection that needs to be resoldered?
5. I think you could get a 5v adapter 2.5 amp or higher with a USB connector and power your box with the USB connector thru one of the USB jacks, if the problem looks internal to the box and you don't have a way to fix the 5v jack. (I prefer 3amp)

Good luck!!